LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
Carrello
TI TPS59650RSLR product image
  • TPS59650RSLR thumbnail 1
  • TPS59650RSLR thumbnail 2
  • TPS59650RSLR thumbnail 3
  • Pinout
  • Footprint
Immagini a scopo illustrativo

TI TPS59650RSLR

Produttore
TI
Cod. Prod.
TPS59650RSLR
Cod. LCSC
C129769
Imballo
VQFN-48-EP(6x6)
Numero Cliente
Attr. chiave
3V~28V VQFN-48-EP(6x6) Special Purpose Regulators RoHS
Scheda TecnicaTI TPS59650RSLR
Conformità RoHS1 documenti disponibili
Garanzia su ogni ordine
100% Autentico · Reso o Sostituzione entro 30 Giorni
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.(Solo per riferimento)Importo totale
1+$ 7.9$ 7.90
10+$ 7.7509$ 77.51
30+$ 7.6511$ 229.53
100+$ 7.5512$ 755.12
Package Standard2500/Full Reel
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Special Purpose Regulators
ProduttoreTI
ImballoVQFN-48-EP(6x6)
Synchronous Rectifier-
Frequency - Switching250kHz~600kHz;275kHz~660kHz
Function-
FeaturesAdjustable current limiting;Overcurrent Protection;Operating status indication
Number of Outputs2
Output Voltage250mV~1.52V
Output Current-
Output Type-
TopologyBuck
Quiescent Current10uA
Switch tube (built-in/external)External
Voltage - Supply3V~28V
Operating Temperature-40℃~+105℃
Aiuto & FeedbackMostra prodotti simili (0) >

Descrizione

Traduzione AI

The TPS51650 and TPS59650 are dual-channel, fully SVID compliant IMVP-7 step-down controllers with two integrated gate drivers. Advanced control features such as D-CAP+ architecture with overlapping pulse support (undershoot reduction, USR) and overshoot reduction (OSR) provide fast transient response, lowest output capacitance and high efficiency. All of these controllers also support single-phase operation for light loads. The full compliment of IMVP-7 I/O is integrated into the controllers including dual PGOOD signals, ALERT and VR_HOT. Adjustable control of VCORE slew rate and voltage positioning round out the IMVP-7 features. In addition, the controllers' CPU channel includes two high-current FET gate drivers to drive high-side and low-side N-channel FETs with exceptionally high speed and low switching loss. The TPS51601 driver is used for the third phase of the CPU and the two phases of the GPU channel. These controllers are packaged in a space-saving, thermally enhanced 48-pin QFN and are rated to operate from -10°C to 105°C.

Caratteristiche

Traduzione AI
  • Intel IMVP-7 Serial VID (SVID) Compliant
  • Supports CPU and GPU Outputs
  • CPU Channel One-Phase, Two-Phase, or Three-Phase
  • One-Phase or Two-Phase GPU Channel
  • Full IMVP-7 Mobile Feature Set Including Digital Current Monitor
  • 8-Bit DAC with 0.250-V to 1.52-V Output Range
  • Optimized Efficiency at Light and Heavy Loads
  • VCORE Overshoot Reduction (OSR)
  • VCORE Undershoot Reduction (USR)
  • Accurate, Adjustable Voltage Positioning
  • 8 Independent Frequency Selections per Channel (CPU/GPU)
  • Patent Pending AutoBalance Phase Balancing
  • Selectable 8-Level Current Limit
  • 3-V to 28-V Conversion Voltage Range
  • Two Integrated Fast FET Drivers w/Integrated Boost FET
  • Selectable Address (TPS59650 only)
  • Small 6x6, 48-Pin, QFN, PowerPAD Package

Applicazioni

Traduzione AI
  • IMVP-7 VCORE Applications for Adapter, Battery, NVDC or 3-V, 5-V, and 12-V Rails