LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Warenkorb
ADI LTC1710CMS8#PBF product image
Abbildung ähnlich

ADI LTC1710CMS8#PBF

Hersteller
ADI
Herst.-Teilenr.
LTC1710CMS8#PBF
LCSC-Nr.
C676534
Verp.
MSOP-8
Kundennummer
Hauptmerkm.
2 Active High 300mA Load Switch MSOP-8 Power Distribution Switches, Load Drivers RoHS
DatenblattADI LTC1710CMS8#PBF
RoHS-Konformität1 Dokumente verfügbar
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 6.5984$ 6.60
200+$ 2.5545$ 510.90
500+$ 2.465$ 1232.50
1,000+$ 2.4202$ 2420.20
Standardgehäuse50/Full Tube
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers
HerstellerADI
Verp.MSOP-8
Operating Temperature0℃~+70℃
FeaturesUnder-voltage lockout;Integrated charge pump;Over temperature protection
number of channels2
Control Input LogicActive High
Maximum Continuous Current300mA
Operating Voltage2.7V~5.5V
RDS(on)400mΩ
TypeLoad Switch
Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >

Beschreibung

KI-Übersetzung

The LTC1710 SMBus dual switch has two built-in 0.4Ω/ 300mA switches that are controlled by a 2-wire SMBus interface. With a low standby current of 14μA(3.3V), the LTC1710 operates over an input voltage range of 2.7V to 5.5V while maintaining the SMBus specified 0.6VVi and 1.4Vₕ input thresholds. Using the 2-wire interface, CLK and DATA, the LTC1710 follows SMBus’s Send Byte Protocol to independently control the two 0.4Ω internal N-channel power switches, which are fully enhanced by onboard charge pumps. The LTC1710 has one three-state programmable address pin that allows three different addresses for a total of six available switches on the same bus. The LTC1710 also features a separate user-controlled drain supply (SW0D) to Switch 0 so that it can be used to control SMBus peripherials using a different power supply.

Merkmale

KI-Übersetzung
  • Two 0.4Ω/300mA N-Channel Switches
  • Available in MS8 and SO-8 Packages
  • SMBus and I2C Compatible
  • 0.6V Vi and 1.4V Vₕ for DATA and CLK
  • Low Standby Current: 14μA
  • Separate Drain Connection to SW0
  • Three Addresses from One Three-State Address Pin
  • Independent Control of Up to Six Switches
  • Built-In Power-On Reset Timer
  • Built-In Undervoltage Lockout

Anwendungen

KI-Übersetzung
  • Handheld Computer Power Management
  • Computer Peripheral Control
  • Laptop Computer Power Plane Switching
  • Portable Equipment Power Control
  • Industrial Control Systems
  • ACPI SMBus Interface