LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Warenkorb
MICROCHIP PIC24FJ512GA606-I/PT product image
  • PIC24FJ512GA606-I/PT thumbnail 1
  • PIC24FJ512GA606-I/PT thumbnail 2
  • PIC24FJ512GA606-I/PT thumbnail 3
  • Pinbelegung
  • Footprint
Abbildung ähnlich

MICROCHIP PIC24FJ512GA606-I/PT

Hersteller
MICROCHIP
Herst.-Teilenr.
PIC24FJ512GA606-I/PT
LCSC-Nr.
C634744
Verp.
TQFP-64(10x10)
Kundennummer
Hauptmerkm.
16-Bit Microcontrollers with Large, Dual Partition Flash Program Memory and USB On-The-Go (OTG)
DatenblattMICROCHIP PIC24FJ512GA606-I/PT
RoHS-Konformität2 Dokumente verfügbar
Alternativteile5
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 9.194$ 9.19
10+$ 9.0341$ 90.34
30+$ 8.927$ 267.81
100+$ 8.8183$ 881.83
Standardgehäuse160/Full Tray
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Embedded/Microcontrollers
HerstellerMICROCHIP
Verp.TQFP-64(10x10)
ADC (Bit)10bit
Number of I/O53
Operating Temperature-40℃~+85℃
Voltage - Supply2V~3.6V
Program Memory TypeFLASH
EEPROM-
Program Storage Size512KB
CPU CorePIC
Core Size16 Bit
CPU Maximum Speed32MHz
Oscillator TypeBuilt-in
Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >

Merkmale

KI-Übersetzung
  • High-Performance CPU:
    • Modified Harvard Architecture
    • Largest Program Memory Available for PIC24 (1024 Kbytes) for the Most Complex Applications
    • 32 Kbytes SRAM for All Part Variants
    • Up to 16 MIPS Operation @ 32 MHz
    • 8 MHz Fast RC Internal Oscillator:
      • 96 MHz PLL option
      • Multiple clock divide options
      • Run-time self-calibration capability for maintaining better than ±0.20% accuracy
      • Fast start-up
    • 17-Bit x 17-Bit Single-Cycle Hardware Fractional/Integer Multiplier
    • 32-Bit by 16-Bit Hardware Divider
    • 16-Bit x 16-Bit Working Register Array
    • C Compiler Optimized Instruction Set Architecture
    • Two Address Generation Units for Separate Read and Write Addressing of Data Memory
  • Universal Serial Bus Features:
    • USB v2.0 On-The-Go (OTG) Compliant
    • Dual Role Capable - Can Act as Either Host or Peripheral
    • Low-Speed (1.5 Mb/s) and Full-Speed (12 Mb/s) USB Operation in Host mode
    • Full-Speed USB Operation in Device mode
    • High-Precision PLL for USB
    • USB Device mode Operation from FRC Oscillator - No Crystal Oscillator Required
    • Supports up to 32 Endpoints (16 bidirectional):
      • USB module can use any RAM location on the device as USB endpoint buffers
    • On-Chip USB Transceiver with Interface for Off-Chip USB Transceiver
    • Supports Control, Interrupt, Isochronous and Bulk Transfers
    • On-Chip Pull-up and Pull-down Resistors
  • Analog Features:
    • 10/12-Bit, up to 24-Channel Analog-to-Digital (A/D) Converter:
      • 12-bit conversion rate of 200 ksps
      • Auto-scan and threshold compare features
      • Conversion available during Sleep
    • Three Rail-to-Rail, Enhanced Analog Comparators with Programmable Input/Output Configuration
    • Charge Time Measurement Unit (CTMU):
      • Used for capacitive touch sensing, up to 24 channels
      • Time measurement down to 100 ps resolution
  • Low-Power Features:
    • Sleep and idle modes Selectively Shut Down Peripherals and/or Core for Substantial Power Reduction and Fast Wake-up
    • Doze mode Allows CPU to Run at a Lower Clock Speed than Peripherals
    • Alternate Clock modes Allow On-the-Fly Switching to a Lower Clock Speed for Selective Power Reduction
    • Wide Range Digitally Controlled Oscillator (DCO) for Fast Start-up and Low-Power Operation
  • Special Microcontroller Features:
    • Large, Dual Partition Flash Program Array:
      • Capable of holding two independent software applications, including bootloader
      • Permits simultaneous programming of one partition while executing application code from the other
      • Allows run-time switching between Active Partitions
    • 10,000 Erase/Write Cycle Endurance, Typical
    • Data Retention: 20 Years Minimum
    • Self-Programmable under Software Control
    • Supply Voltage Range of 2.0V to 3.6V
    • Operating Ambient Temperature from -40°C to +85°C for Industrial and from -40°C to +125°C for Extended Temperature Range Devices
    • On-Chip Voltage Regulators (1.8V) for Low-Power Operation
    • Programmable Reference Clock Output
    • In-Circuit Serial Programming (ICSP) and In-Circuit Emulation (ICE) via Two Pins
    • JTAG Boundary Scan Support
    • Fail-Safe Clock Monitor Operation:
      • Detects clock failure and switches to on-chip, low-power RC Oscillator
    • Power-on Reset (POR), Brown-out Reset (BOR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
    • Programmable High/Low-Voltage Detect (H/LVD)
    • Flexible Watchdog Timer (WDT) with its Own RC Oscillator for Reliable Operation
  • Peripheral Features:
    • Peripheral Pin Select (PPS) - Allows Independent I/O Mapping of Many Peripherals
    • Up to Five External Interrupt Sources
    • Configurable Interrupt-on-Change on All I/O Pins:
      • Each pin is independently configurable for rising edge or falling edge change detection
    • Eight-Channel DMA Supports All Peripheral modules:
      • Minimizes CPU overhead and increases data throughput
    • Five 16-Bit Timers/Counters with Prescalers:
      • Can be paired as 32-bit timers/counters
    • Six Input Capture modules, Each with a Dedicated 16-Bit Timer
    • Six Output Compare/PWM modules, Each with a Dedicated 16-Bit Timer
    • Four Single Output CCPs (SCCPs) and Three Multiple Output CCPs (MCCPs):
      • Independent 16/32-bit time base for each module
      • Internal time base and period registers
      • Legacy PIC24F Capture and Compare modes (16 and 32-bit)
      • Special Variable Frequency Pulse and Brushless DC Motor Output modes
    • Enhanced Parallel Master/Slave Port (EPMP/EPSP)
    • Hardware Real-Time Clock/Calendar (RTCC) with Timestamping
    • Three 3-Wire/4-Wire SPI modules:
      • Support four Frame modes
      • Eight-level FIFO buffer
      • Support I2S operation
    • Three I2C modules Support Multi-Master/Slave mode and 7-Bit/10-Bit Addressing
    • Six UART modules:
      • Support RS-485, RS-232 and LIN/J2602
      • On-chip hardware encoder/decoder for IrDA
      • Auto-wake-up on Auto-Baud Detect (ABD)
      • Four-level deep FIFO buffer
    • Programmable 32-Bit Cyclic Redundancy Check (CRC) Generator
    • Four Configurable Logic Cells (CLCs):
      • Two inputs and one output, all mappable to peripherals or I/O pins
      • AND/OR/XOR logic and D/JK flip-flop functions
    • High-Current Sink/Source (18 mA/18 mA) on All I/O Pins
    • Configurable Open-Drain Outputs on Digital I/O Pins
    • 5.5V Tolerant Inputs on Multiple I/O Pins

Alternativteile

MPNHerstellerAlternativtypVerpackungVerfügbarkeitStückpreis
PIC24FJ1024GA606T-I/PTMICROCHIPÄhnlicheTQFP-64(10x10)3$ 10.5338
PIC24FJ1024GB606-I/PTMICROCHIPÄhnlicheTQFP-64(10x10)2$ 11.7818
PIC24FJ512GA606T-I/PTMICROCHIPÄhnlicheTQFP-64(10x10)0$ 17.4409
PIC24FJ512GB606T-I/PTMICROCHIPÄhnlicheTQFP-64(10x10)0$ 5.2309
PIC24FJ512GB606-I/PTMICROCHIPÄhnlicheTQFP-64(10x10)0$ 7.2271
Alle alternativen Bauteile anzeigen und vergleichen.