Name: MICROCHIP PIC32MX575F512HT-80V/PT
Brand: MICROCHIP
SKU: C631376
Price: 3.7352 USD
Availability: OutOfStock

MIPS16e® mode for up to 40% smaller code size
Code-efficient (C and Assembly) architecture
Single-cycle (MAC) 32x16 and two-cycle 32x32 multiply
0.9% internal oscillator (on some variants)
Programmable PLLs and oscillator clock sources
Fail-Safe Clock Monitor (FSCM)
Independent Watchdog Timer
Fast wake-up and start-up
Low-power management modes (Sleep and Idle)
Integrated Power-on Reset, Brown-out Reset
0.5 mA/MHz dynamic current (typical)
41 μA IPD current (typical)
External graphics interface with up to 34 Parallel Master Port (PMP) pins: Interface to external graphics controller; Capable of driving LCD directly with DMA and internal or external memory
ADC Module: 10-bit 1 Msps rate with one Sample and Hold (S&H); 16 analog inputs; Can operate during Sleep mode
Flexible and independent ADC trigger sources
Comparators: Two dual-input Comparator modules; Programmable references with 32 voltage points
Five General Purpose Timers: Five 16-bit and up to two 32-bit Timers/Counters
Five Output Compare (OC) modules
Five Input Capture (IC) modules
Real-Time Clock and Calendar (RTCC) module
USB 2.0-compliant Full-Speed OTG controller
10/100 Mbps Ethernet MAC with MII and RMII interface
CAN module: 2.0B Active with DeviceNet addressing support
Six UART modules (20 Mbps): Supports LIN 2.1 protocols and IrDA support
Up to four 4-wire SPI modules (25 Mbps)
Up to five I²C modules (up to 1 Mbaud) with SMBus support
Parallel Master Port (PMP)
Up to eight channels of hardware DMA with automatic data size detection
32-bit Programmable Cyclic Redundancy Check (CRC)
Six additional channels dedicated to USB, Ethernet and CAN modules
15 mA or 10 mA source/sink for standard VOH/VOL and up to 22 mA for non-standard VOH1
5V-tolerant pins
Selectable open drain and pull-ups
External interrupts
Class B Safety Library, IEC 60730
In-circuit and in-application programming
4-wire MIPS® Enhanced JTAG interface
Unlimited program and six complex data breakpoints
IEEE 1149.2-compatible (JTAG) boundary scan

MIPS16e® mode for up to 40% smaller code size
Code-efficient (C and Assembly) architecture
Single-cycle (MAC) 32x16 and two-cycle 32x32 multiply
0.9% internal oscillator (on some variants)
Programmable PLLs and oscillator clock sources
Fail-Safe Clock Monitor (FSCM)
Independent Watchdog Timer
Fast wake-up and start-up
Low-power management modes (Sleep and Idle)
Integrated Power-on Reset, Brown-out Reset
0.5 mA/MHz dynamic current (typical)
41 μA IPD current (typical)
External graphics interface with up to 34 Parallel Master Port (PMP) pins: Interface to external graphics controller; Capable of driving LCD directly with DMA and internal or external memory
ADC Module: 10-bit 1 Msps rate with one Sample and Hold (S&H); 16 analog inputs; Can operate during Sleep mode
Flexible and independent ADC trigger sources
Comparators: Two dual-input Comparator modules; Programmable references with 32 voltage points
Five General Purpose Timers: Five 16-bit and up to two 32-bit Timers/Counters
Five Output Compare (OC) modules
Five Input Capture (IC) modules
Real-Time Clock and Calendar (RTCC) module
USB 2.0-compliant Full-Speed OTG controller
10/100 Mbps Ethernet MAC with MII and RMII interface
CAN module: 2.0B Active with DeviceNet addressing support
Six UART modules (20 Mbps): Supports LIN 2.1 protocols and IrDA support
Up to four 4-wire SPI modules (25 Mbps)
Up to five I²C modules (up to 1 Mbaud) with SMBus support
Parallel Master Port (PMP)
Up to eight channels of hardware DMA with automatic data size detection
32-bit Programmable Cyclic Redundancy Check (CRC)
Six additional channels dedicated to USB, Ethernet and CAN modules
15 mA or 10 mA source/sink for standard VOH/VOL and up to 22 mA for non-standard VOH1
5V-tolerant pins
Selectable open drain and pull-ups
External interrupts
Class B Safety Library, IEC 60730
In-circuit and in-application programming
4-wire MIPS® Enhanced JTAG interface
Unlimited program and six complex data breakpoints
IEEE 1149.2-compatible (JTAG) boundary scan

Produttore	MICROCHIP
Cod. Prod.	PIC32MX575F512HT-80V/PT
Cod. LCSC	C631376
Imballo	TQFP-64(10x10)
Numero Cliente
Attr. chiave	MIPS32 M4K 32 Bit 80MHz TQFP-64(10x10) Microcontrollers RoHS
Scheda Tecnica	MICROCHIP PIC32MX575F512HT-80V/PT
Conformità RoHS	2 documenti disponibili
Parti alternative	5

Tipo	Descrizione
Categoria	Integrated Circuits (ICs)/Embedded/Microcontrollers
Produttore	MICROCHIP
Imballo	TQFP-64(10x10)
ADC (Bit)	10bit
Number of I/O	53
Operating Temperature	-40℃~+105℃
Voltage - Supply	2.3V~3.6V
Program Memory Type	FLASH
EEPROM	-
Program Storage Size	512KB
CPU Core	MIPS32 M4K
Core Size	32 Bit
CPU Maximum Speed	80MHz
Oscillator Type	Built-in

Tipo	Descrizione
Categoria	Integrated Circuits (ICs)/Embedded/Microcontrollers
Produttore	MICROCHIP
Imballo	TQFP-64(10x10)
ADC (Bit)	10bit
Number of I/O	53
Operating Temperature	-40℃~+105℃
Voltage - Supply	2.3V~3.6V

Tipo	Descrizione
Program Memory Type	FLASH
EEPROM	-
Program Storage Size	512KB
CPU Core	MIPS32 M4K
Core Size	32 Bit
CPU Maximum Speed	80MHz
Oscillator Type	Built-in

Qtà	Pr. unit.(Solo per riferimento)	Importo totale
1+	$ 10.187	$ 10.19
200+	$ 3.9421	$ 788.42
500+	$ 3.8047	$ 1902.35
1,200+	$ 3.7352	$ 4482.24
Package Standard1200/Full Reel

MICROCHIP PIC32MX575F512HT-80V/PT

Specifiche del Prodotto

Caratteristiche

Specifiche del Prodotto

Caratteristiche

Conformità & Codici di Esportazione

Parti alternative

Tipo	Dettagli
RoHS	ROHS3 Compliant
ECCN	3A991A2
CNHTS	8542319090
USHTS
TARIC
CAHTS
BRHTS
INHTS
MXHTS

MPN	Produttore	Tipo alternativo	Imballaggio	Disponibilità	Prezzo unitario
PIC32MX675F512HT-80I/PT	MICROCHIP	Simili	TQFP-64(10x10)	5	$ 11.8196
PIC32MX675F512H-80I/PT	MICROCHIP	Simili	TQFP-64(10x10)	5	$8.9139 $15.9176
PIC32MX775F512H-80I/PT	MICROCHIP	Simili	TQFP-64(10x10)	2	$ 14.4702
PIC32MX795F512H-80V/PT	MICROCHIP	Simili	TQFP-64(10x10)	16	$ 16.9503
PIC32MX440F512H-80I/PT	MICROCHIP	Simili	TQFP-64(10x10)	9	$ 17.3452