MXIC MX25U12832FM2I02

MX25U12832F is 128Mb bits Serial NOR Flash memory, which is configured as 16,777,216 x 8 internally.

• J Grade (Temperature = -40°C to 105°C)
• Protocol Support: Single I/O, Dual I/O and Quad I/O
• Quad Peripheral Interface (QPI) available
• Supports clock frequencies up to 120MHz
• Program/Erase Suspend and Resume
• Supports Serial Peripheral Interface - Mode 0 and Mode 3
• Single Power Supply Operation - 1.65 to 2.0 volts for read, erase, and program operations
• 134,217,728 x 1 bit structure or 67,108,864 x 2 bits (two I/O mode) structure or 33,554,432 x 4 bits (four I/O mode) structure
• Latch - up protected to 100mA from -1V to Vcc +1V
• Fast read for SPI mode - Supports clock frequencies up to 120MHz for all protocols
• Supports Fast Read, 2READ, DREAD, 4READ, QREAD instructions
• Configurable dummy cycle number for fast read operation
• Support Performance Enhance Mode - XIP (execute - in - place)
• Equal 4K byte sectors, or Equal Blocks with 32K bytes or 64K bytes each - Any Block can be erased individually
• Programming: 256byte page buffer - Quad Input/Output page program(4PP) to enhance program performance
• Typical 100,000 erase/program cycles
• 20 years data retention
• Input Data Format - 1 - byte Command code
• Advanced Security Features - Block lock protection. The BP0 - BP3 and T/B status bit defines the size of the area to be protection against program and erase instructions
• Advanced sector protection function (Solid Protect)
• Additional 8K bit Secure OTP Features unique identifier - Factory locked identifiable, and customer lockable
• Command Reset
• Electronic Identification: JEDEC 1 - byte manufacturer ID and 2 - byte device ID - RES command for 1 - byte Device ID - REMS command for 1 - byte manufacturer ID and 1 - byte device ID
• Support Serial Flash Discoverable Parameters (SFDP) mode
• SCLK Input - Serial clock input
• SI/SIO0 - Serial Data Input or Serial Data Input/Output for 2 x I/O read mode and 4 x I/O read mode
• SO/SIO1 - Serial Data Output or Serial Data Input/Output for 2 x I/O read mode and 4 x I/O read mode
• WP#/SIO2 - Hardware write protection or Serial Data Input/ Output for 4 x I/O read mode
• RESET#/SIO3 - Hardware Reset pin or Serial Data Input/Output for 4 x I/O read mode
• PACKAGE - 8 - land WSON (6x5mm)
• All devices are RoHS Compliant and Halogen - free