FUDAN MICRO FM25Q16A-SOB-T-G

The FM25Q16A is a 16M-bit (2M-byte) Serial Flash memory, with advanced write protection mechanisms. The FM25Q16A supports the standard Serial Peripheral Interface (SPI), Dual/Quad I/O as well as 2-clock instruction cycle Quad Peripheral Interface (QPI). They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The FM25Q16A can be programmed 1 to 256 bytes at a time, using the Page Program instruction. It is designed to allow either single Sector/Block at a time or full chip erase operation. The FM25Q16A can be configured to protect part of the memory as the software protected mode. The device can sustain a minimum of 100K program/erase cycles on each sector or block. 64-Bit Unique ID for each device Discoverable parameters(SFDP) register

• 16Mbit of Flash memory
  • 512 uniform sectors with 4K-byte each
  • 32 uniform blocks with 64K-byte each or 64 uniform blocks with 32K-byte each
  • 256 bytes per programmable page
• Wide Operation Range
  • 2.3V~3.6V single voltage supply
  • Industrial temperature range
• Serial Interface
  • Standard SPI: CLK, CS#, DI, DO, WP#
  • Dual SPI: CLK, CS#, DQ₀, DQ₁, WP#
  • Quad SPI: CLK, CS#, DQ₀, DQ₁, DQ₂, DQ₃
  • QPI: CLK, CS#, DQ₀, DQ₁, DQ₂, DQ₃
  • Continuous READ mode support
  • Program/Erase Suspend and Resume support
  • Allow true XIP (execute in place) operation
• High Performance
  • Max FAST_READ clock frequency: 104MHz
  • Max READ clock frequency: 66MHz
  • Typical page program time: 0.35ms
  • Typical sector erase time: 45ms
  • Typical block erase time: 120/150ms
  • Typical chip erase time: 5s
  • Low Power Consumption
  • Typical Deep Power Down current: <1μA
• Security
  • Software and hardware write protection
  • Lockable 4X256-Byte OTP security Pages