LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Warenkorb
RENESAS ISL8016IR15Z product image
Abbildung ähnlich

RENESAS ISL8016IR15Z

Hersteller
RENESAS
Herst.-Teilenr.
ISL8016IR15Z
LCSC-Nr.
C3191968
Verp.
QFN-20(3x4)
Kundennummer
Hauptmerkm.
500kHz~4MHz Step-down type Fixed 6A 1.5V QFN-20(3x4) Voltage Regulators - DC DC Switching Regulators RoHS
DatenblattRENESAS ISL8016IR15Z
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 6.3789$ 6.38
200+$ 2.4685$ 493.70
500+$ 2.3821$ 1191.05
1,000+$ 2.3389$ 2338.90
Standardgehäuse1/Full Bag
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - DC DC Switching Regulators
HerstellerRENESAS
Verp.QFN-20(3x4)
Operating Temperature-40℃~+85℃@(TA)
Frequency - Switching500kHz~4MHz
FunctionStep-down type
Number of Outputs1
FeaturesAdjustable current limiting;Adjustable soft-start;Output discharge;Frequency synchronization;Light load efficient mode;Cycle-by-cycle current limiting;Hiccup current limiting;Overcurrent Protection;Operating status indication
TopologyBuck
Output TypeFixed
Operating Voltage2.7V~5.5V
Switch tube (built-in/external)Built-in
Output Current6A
Output Voltage1.5V
Quiescent Current-
Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >

Beschreibung

KI-Übersetzung

The ISL8016 is a high efficiency, monolithic, synchronous step-down DC/DC converter that can deliver up to 6A continuous output current from a 2.7V to 5.5V input supply. The output voltage is adjustable from 0.6V to VIN. With an adjustable current limit, reverse current protection, pre-bias start and over temperature protection the ISL8016 offers a highly robust power solution. It uses current control architecture to deliver fast transient response and excellent loop stability. The ISL8016 integrates a pair of low ON-resistance P-Channel and N-Channel internal MOSFETs to maximize efficiency and minimize external component count. ±00% duty-cycle operation allows less than 200mV dropout at 6A output current. Adjustable frequency and synchronization allow the ISL8016 to be used in applications requiring low noise. Paralleling capability with phase interleaving allows the IC to support >6A output current while offering reduced input and output noise. The ISL8016 can be configured for discontinuous or forced continuous operation at light load. Forced continuous operation reduces noise and RF interference while discontinuous mode provides high efficiency by reducing switching losses at light loads. The ISL8016 is offered in a space saving 20 Ld 3x4 QFN lead free package with exposed pad lead frames for excellent thermal performance. The complete converter occupies less than 0.15in² area.

Merkmale

KI-Übersetzung
  • High Efficiency Synchronous Buck Regulator with up to 97% Efficiency
  • ±% Reference Accuracy Over-Temperature/Load/Line
  • Fixed Output Voltage Option
  • ±10% Output Voltage Margining
  • Adjustable Current Limit
  • Current Sharing Capable
  • Start-up with Pre-Biased Output
  • Internal Soft-Start - 1ms or Adjustable, Internal/External Compensation
  • Soft-Stop Output Discharge During Disabled
  • Adjustable Frequency from 500kHz to 4MHz - Default at 1MHz
  • External Synchronization up to 4MHz - Master to Slave Phase Shifting Capability
  • Peak current limiting, Hiccup Mode Short Circuit Protection and Over-Temperature Protection

Anwendungen

KI-Übersetzung
  • DC/DC POL Modules
  • MC/MP, FPGA and DSP Power
  • Plug-in DC/DC Modules for Routers and Switchers
  • Portable Instruments
  • Test and Measurement Systems
  • Li-ion Battery Powered Devices