RENESAS X9317WM8Z-2.7

The X9317 is a digitally controlled potentiometer (XDCP™). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a 3-wire interface. The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The position of the wiper can be stored in nonvolatile memory and then be recalled upon a subsequent power-up operation. The device can be used as a three-terminal potentiometer for voltage control or as a two-terminal variable resistor for current control in a wide variety of applications.

• Solid-state potentiometer
• 3-wire serial up/down interface
• 100 wiper tap points - Wiper position stored in nonvolatile memory and recalled on power-up
• 99 resistive elements - Temperature compensated - End-to-end resistance range ±20%
• Low power CMOS - VCC = 2.7V to 5.5V, and 5V ±10% - Standby current < 5μA
• Endurance, 100,000 data changes per bit - Register data retention, 100 years
• RTOTAL values = 10kΩ, 50kΩ, 100kΩ
• Packages - 8 Ld SOIC, TSSOP, and MSOP
• Pb-free (RoHS compliant)

• LCD bias control
• DC bias adjustment
• Gain and offset trim
• Laser diode bias control
• Voltage regulator output control