LCSC Electronics logoLCSC Electronics svg logo
Connexion
USD

TOREX XC6220B331MR-G

Fabricant
Réf. Fab.
XC6220B331MR-G
Réf. LCSC
C86534
Condit.
SOT-25
Numéro Client
Caract. clés
1A LDO Voltage Regulator with Green Operation
Fiche TechniqueTOREX XC6220B331MR-G
Conformité RoHS2 documents disponibles
Pièces alternatives5
Garantie sur chaque commande
100% Authentique · Retour ou échange sous 30 Jours

Spécifications du Produit

Tout
TypeDescription
CatégorieIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - Linear, Low Drop Out (LDO) Regulators
FabricantTOREX
Condit.SOT-25
Output Voltage3.3V
Number of Outputs1
Operating Temperature-40℃~+85℃
Supply Current (Iq)8uA
Output ConfigurationPositive
Output Current1A
Operating Voltage6V
FeaturesEnable control;Over Current Protection;Thermal shutdown;Output discharge;Short Circuit Protection
Output TypeFixed

Description

Traduction par IA

The XC6220 series is a highly accurate, low noise, high speed, low dropout, and large current CMOS voltage regulator with GreenOperation function. The series consists of a voltage reference, an error amplifier, a current limiter, an inrush current prevention circuit and a phase compensation circuit plus a driver transistor. With a 0.2Ω on-resistance driver transistor integrated, the ultra low dropout voltage performance with output currents up to 1A greatly extends battery life as does the GreenOperation function which can switch between high speed and power save modes automatically. A low ESR ceramic capacitor can be used for the output stabilization capacitor (CL). Output voltage is selectable in 0.05V increments within the range of 0.8V~5.0V, using laser trimming technologies. An over current protection circuit and a thermal shutdown circuit are built in. The over current protection circuit will operate when the output current reaches its limit current. The thermal shutdown circuit will operate when the junction temperature reaches its limit temperature. The inrush prevention circuit works by controlling the inrush current which charges to CL when the IC starts up. In this way, voltage fluctuations in power supply caused by inrush current during system start up can be minimized. The CE function enables the output to be turned off and the IC becomes a stand-by mode resulting in greatly reduced power consumption.

Caractéristiques

Traduction par IA
  • Maximum Output Current : 1000mA (1.2V≦VOUT≦5.0V)
  • Dropout Voltage : 20mV @ 100mA (VOUT=3.0V) : 60mV@ 300mA (VOUT=3.0V)
  • Operating Voltage Range : 1.6V ~ 6.0V
  • Output Voltage Range : 0.8V~5.0 V (0.05V increments)
  • Accuracy :±1% (VOUT≧2.0V) :±20mV (VOUT<2.0V)
  • Low Power Consumption : 8μA (TYP.) in PS mode : 50μA (TYP.) in HS mode
  • Operating Ambient Temperature : -40°C-+85°C
  • Thermal Shutdown : Detect 150°C, Release 135°C (TYP.)
  • Inrush Current Prevention : 700mA (MAX.)
  • CL Auto Discharge : XC6220 Series B/D type
  • CE Pull-Down Resistor : XC6220 Series C/D type
  • Output Capacitor : Ceramic Capacitor Compatible
  • Packages : USP-6C, SOT-25, SOT-89-5 SOP-8FD
  • Environmentally Friendly : EU RoHS Compliant, Pb Free

Applications

Traduction par IA
  • Optical disk drive
  • Magnetic disk drive
  • Digital still cameras / Camcorders
  • Digital audio equipments