LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
MAXIM MAX1193ETI+ product image
Immagini a scopo illustrativo

MAXIM MAX1193ETI+

Produttore
Cod. Prod.
MAX1193ETI+
Cod. LCSC
C7454497
Imballo
TQFN-28(5x5)
Numero Cliente
Attr. chiave
Ultra-Low-Power, 45Msps, Dual 8-Bit ADC
Scheda TecnicaMAXIM MAX1193ETI+
Conformità RoHS1 documenti disponibili
Parti alternative1
Garanzia su ogni ordine
100% Autentico · Reso o Sostituzione entro 30 Giorni
Disponibile: 2
2 Pronta consegna
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.Importo totale
1+$ 15.977$ 15.98
10+$ 15.2209$ 152.21
60+$ 13.9128$ 834.77
120+$ 12.7712$ 1532.54
Package Standard60/Full Tray
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Data Acquisition/Analog to Digital Converters (ADC)
ProduttoreMAXIM
ImballoTQFN-28(5x5)
Operating Temperature-40℃~+85℃
Voltage ReferenceBuilt-in;External
Clock Frequency45MHz
FeaturesBipolar input;Simultaneous sampling;Multiplexers
InterfaceParallel port
Resolution(Bits)8;45MHz
S/N Ratio48.5dB
Voltage - Supply2.7V~3.6V
Number of Channels2
Integral non - linearity0.16LSB

Descrizione

Traduzione AI

The MAX1193 is an ultra-low-power, dual, 8-bit, 45Msps analog-to-digital converter (ADC). The device features two fully differential wideband track-and-hold (T/H) inputs. These inputs have a 440MHz bandwidth and accept fully differential or single-ended signals. The MAX1193 delivers a typical signal-to-noise and distortion (SINAD) of 48.5dB at an input frequency of 5.5MHz and a sampling rate of 45Msps while consuming only 57mW. This ADC operates from a 2.7V to 3.6V analog power supply. A separate 1.8V to 3.6V supply powers the digital output driver. In addition to ultra-low operating power, the MAX1193 features three powerdown modes to conserve power during idle periods. Excellent dynamic performance, ultra-low power, and small size make the MAX1193 ideal for applications in imaging, instrumentation, and digital communications. An internal 1.024V precision bandgap reference sets the full-scale range of the ADC to ±0.512V. A flexible reference structure allows the MAX1193 to use its internal reference or accept an externally applied reference for applications requiring increased accuracy. The MAX1193 features parallel, multiplexed, CMOS-compatible tri-state outputs. The digital output format is offset binary. A separate digital power input accepts a voltage from 1.8V to 3.6V for flexible interfacing to different logic levels. The MAX1193 is available in a 5mm x 5mm, 28-pin thin QFN package, and is specified for the extended industrial (-40℃ to +85℃) temperature range.

Caratteristiche

Traduzione AI
  • Ultra-Low Power 57mW (Normal Operation: 45Msps) 0.3μW (Shutdown Mode)
  • Excellent Dynamic Performance 48.5dB/48.3dB SNR at fIN = 5.5MHz/100MHz 70dBc/68dBc SFDR at fIN = 5.5MHz/100MHz
  • 2.7V to 3.6V Single Analog Supply
  • 1.8V to 3.6V TTL/CMOS-Compatible Digital Outputs
  • Fully Differential or Single-Ended Analog Inputs
  • Internal/External Reference Option
  • Multiplexed CMOS-Compatible Tri-State Outputs
  • 28-Pin Thin QFN Package
  • Evaluation Kit Available (Order MAX1193EVKIT)

Applicazioni

Traduzione AI
  • Ultrasound and Medical Imaging
  • IQ Baseband Sampling
  • Battery-Powered Portable Instruments
  • Low-Power Video
  • WLAN, Mobile DSL, WLL Receiver

Parti alternative

MPNProduttoreTipo alternativoImballaggioDisponibilitàPrezzo unitario
MAX1193ETI+TMAXIMConf. Alt.TQFN-28-EP(5x5)0$ 7.2607
1 altri componenti alternativi.Visualizza tutti i sostituti