LCSC Electronics logoLCSC Electronics svg logo
Entrar
USD
Carrinho
muRata OKL-T/6-W12P-C product image
Imagens ilustrativas

muRata OKL-T/6-W12P-C

Fabricante
muRata
Cód. da peça
OKL-T/6-W12P-C
Nº LCSC
C7250619
Emb.
SMD,12.2x12.2mm
Número do Cliente
Atrib. princ.
591mV~5.5V 4.5V~14V SMD,12.2x12.2mm DC DC Converters RoHS
Folha de DadosmuRata OKL-T/6-W12P-C
Conformidade RoHS2 documentos disponíveis
Garantia em cada pedido
100% Autêntico · Devolução ou Substituição em 30 Dias

Especificações do Produto

Tudo
TipoDescrição
CategoriaPower Supplies/Power Suppliers - Board Mount/DC DC Converters
FabricantemuRata
Emb.SMD,12.2x12.2mm
Output Voltage591mV~5.5V
Ripple Noise20mVp-p
Operating Temperature-
Type-
Quiescent Supply Current20mA
Voltage - Supply4.5V~14V
Capacitive Load(Max)300uF
Number of Outputs1
Iout6A
Height7.2mm
Frequency - Switching600kHz
Isolation Voltage(Vrms)-
FeaturesShort Circuit Protection;Over Current Protection;Under Voltage Protection;Overheat Protection;Automatic fault recovery;Power-on timing control
Conversion Efficiency93%
Output Power30W
Length12.2mm
Width12.2mm
Ajuda e FeedbackMostrar produtos similares (0) >

Descrição

Tradução por IA

The OKL-T/6-W12 series are miniature non-isolated Point-of-Load (P0L) DC/DC power converters for embedded applications. Featuring inspectable Land Grid Array (iLGA) format, the OKL-T/6-W12 measures only 0.48×0.48×0.283 inches max. (12.2×12.2×7.2 mm max.). The wide input range is 4.5 to 14 Volts DC. The maximum output current is 6 Amps. Based on fixed-frequency synchronous buck converter switching topology, the high power conversion efficient Point of Load (PoL) module features programmable output voltage and On/Off control. These converters also include under voltage lock out (UVLO), output short circuit protection, and over-current protections. An optional sequence/tracking feature on OKL2-T/6-W12 models allows power sequencing of PoL’s. These units meet all standard UL/IEC 60950-1 safety certifications (2nd Edition) and RoHS hazardous substance compliance.

Recursos

Tradução por IA
  • miniature non-isolated Point-of-Load (P0L) DC/DC power converters for embedded applications
  • inspectable Land Grid Array (iLGA) format
  • measures only 0.48×0.48×0.283 inches max. (12.2×12.2×7.2 mm max.)
  • wide input range is 4.5 to 14 Volts DC
  • maximum output current is 6 Amps
  • based on fixed-frequency synchronous buck converter switching topology
  • high power conversion efficient
  • programmable output voltage and On/Off control
  • include under voltage lock out (UVLO), output short circuit protection, and over-current protections
  • optional sequence/tracking feature on OKL2-T/6-W12 models allows power sequencing of PoL’s
  • meet all standard UL/IEC 60950-1 safety certifications (2nd Edition) and RoHS hazardous substance compliance