ADI LT5502EGN#PBF
| Produttore | |
| Cod. Prod. | LT5502EGN#PBF |
| Cod. LCSC | C672582 |
| Imballo | SSOP-24-150mil |
| Numero Cliente | |
| Attr. chiave | 70MHz~400MHz 1.8V~5.25V 32mA SSOP-24-150mil RF Misc ICs and Modules RoHS |
| Scheda Tecnica | ADI LT5502EGN#PBF |
| Conformità RoHS | 1 documenti disponibili |
Specifiche del Prodotto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | RF and Wireless/RF Misc ICs and Modules | |
| Produttore | ADI | |
| Imballo | SSOP-24-150mil | |
| Frequency Range | 70MHz~400MHz | |
| Voltage - Supply | 1.8V~5.25V | |
| Features | RSSI function available | |
| Current - Supply | 32mA |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | RF and Wireless/RF Misc ICs and Modules | |
| Produttore | ADI | |
| Imballo | SSOP-24-150mil | |
| Frequency Range | 70MHz~400MHz |
| Tipo | Descrizione | |
|---|---|---|
| Voltage - Supply | 1.8V~5.25V | |
| Features | RSSI function available | |
| Current - Supply | 32mA |
Descrizione
The LT5502 is a 70MHz to 400MHz monolithic integrated quadrature IF demodulator. It consists of an IF limiter, quadrature down mixers, integrated lowpass filters, and divide-by-two LO buffers. The demodulator provides all building blocks for demodulation of I and Q baseband signals with a single supply voltage of 1.8V to 5.25V. The IF limiter has 84dB small-signal gain, and a built-in receive signal strength indicator (RSSI) with over 90dB linear range. The input referred noise-spectral-density is 1.45nV/√Hz, which is equivalent to a 4dB noise figure when the input is terminated with a 50Ω source. The integrated lowpass output filters act as antialiasing and pulse-shaping filters for demodulated I/Q-baseband signals. The 3dB cutoff frequency of the filters is about 7.7MHz. The VCO frequency is required to be twice the desired operating frequency to provide quadrature local oscillator (LO) signals to the mixers. The standby mode provides fast transient response to the receive mode with reduced supply current when the I/Q outputs are AC-coupled to a baseband chip.
Caratteristiche
- Single 1.8V to 5.25V Supply
- IF Frequency Range: 70MHz to 400MHz
- 84dB Limiting IF Gain
- 90dB Linear RSSI Range
- 7.7MHz Lowpass Output Filter
- Baseband I/Q Amplitude Imbalance: < 0.70dB
- 4dB Noise Figure
- Low Supply Current: 25mA
- Outputs Biased Up While in Standby
- Shutdown Current: 1µA
- 24-Lead Narrow SSOP Package
Applicazioni
- IEEE802.11 High Speed Wireless LAN
- Wireless Local Loop
| Qtà | Pr. unit.(Solo per riferimento) | Importo totale |
|---|---|---|
| 1+ | $ 10.0897 | $ 10.09 |
| 200+ | $ 3.905 | $ 781.00 |
| 500+ | $ 3.7677 | $ 1883.85 |
| 1,000+ | $ 3.6997 | $ 3699.70 |
Package Standard55/Full Tube | ||
Specifiche del Prodotto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | RF and Wireless/RF Misc ICs and Modules | |
| Produttore | ADI | |
| Imballo | SSOP-24-150mil | |
| Frequency Range | 70MHz~400MHz | |
| Voltage - Supply | 1.8V~5.25V | |
| Features | RSSI function available | |
| Current - Supply | 32mA |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | RF and Wireless/RF Misc ICs and Modules | |
| Produttore | ADI | |
| Imballo | SSOP-24-150mil | |
| Frequency Range | 70MHz~400MHz |
| Tipo | Descrizione | |
|---|---|---|
| Voltage - Supply | 1.8V~5.25V | |
| Features | RSSI function available | |
| Current - Supply | 32mA |
Descrizione
The LT5502 is a 70MHz to 400MHz monolithic integrated quadrature IF demodulator. It consists of an IF limiter, quadrature down mixers, integrated lowpass filters, and divide-by-two LO buffers. The demodulator provides all building blocks for demodulation of I and Q baseband signals with a single supply voltage of 1.8V to 5.25V. The IF limiter has 84dB small-signal gain, and a built-in receive signal strength indicator (RSSI) with over 90dB linear range. The input referred noise-spectral-density is 1.45nV/√Hz, which is equivalent to a 4dB noise figure when the input is terminated with a 50Ω source. The integrated lowpass output filters act as antialiasing and pulse-shaping filters for demodulated I/Q-baseband signals. The 3dB cutoff frequency of the filters is about 7.7MHz. The VCO frequency is required to be twice the desired operating frequency to provide quadrature local oscillator (LO) signals to the mixers. The standby mode provides fast transient response to the receive mode with reduced supply current when the I/Q outputs are AC-coupled to a baseband chip.
Caratteristiche
- Single 1.8V to 5.25V Supply
- IF Frequency Range: 70MHz to 400MHz
- 84dB Limiting IF Gain
- 90dB Linear RSSI Range
- 7.7MHz Lowpass Output Filter
- Baseband I/Q Amplitude Imbalance: < 0.70dB
- 4dB Noise Figure
- Low Supply Current: 25mA
- Outputs Biased Up While in Standby
- Shutdown Current: 1µA
- 24-Lead Narrow SSOP Package
Applicazioni
- IEEE802.11 High Speed Wireless LAN
- Wireless Local Loop
C672582 Libreria EasyEDA
Conformità & Codici di Esportazione
| Tipo | Dettagli |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8517799000 |
| USHTS | 8517790000 |
| TARIC | 8517790000 |
| CAHTS | 8517790000 |
| BRHTS | 85177900 |
| INHTS | 85177990 |
| MXHTS | 8517.70.99 |
| Tipo | Dettagli |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8517799000 |
| USHTS | 8517790000 |
| TARIC | 8517790000 |
| Tipo | Dettagli |
|---|---|
| CAHTS | 8517790000 |
| BRHTS | 85177900 |
| INHTS | 85177990 |
| MXHTS | 8517.70.99 |

