LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
Carrello
MICROCHIP MCP1727-5002E/SN product image
  • MCP1727-5002E/SN thumbnail 1
  • MCP1727-5002E/SN thumbnail 2
  • MCP1727-5002E/SN thumbnail 3
  • Pinout
  • Footprint
Immagini a scopo illustrativo

MICROCHIP MCP1727-5002E/SN

Produttore
MICROCHIP
Cod. Prod.
MCP1727-5002E/SN
Cod. LCSC
C635936
Imballo
SOIC-8
Numero Cliente
Attr. chiave
1.5A, Low Voltage, Low Quiescent Current LDO Regulator
Scheda TecnicaMICROCHIP MCP1727-5002E/SN
Conformità RoHS2 documenti disponibili
Garanzia su ogni ordine
100% Autentico · Reso o Sostituzione entro 30 Giorni
Disponibile: 5
5 Pronta consegna
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.Importo totale
1+$ 2.3494$ 2.35
10+$ 2.1634$ 21.63
30+$ 2.0457$ 61.37
100+$ 1.9263$ 192.63
500+$ 1.8721$ 936.05
1,000+$ 1.8489$ 1848.90
Package Standard100/Full Tube
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - Linear, Low Drop Out (LDO) Regulators
ProduttoreMICROCHIP
ImballoSOIC-8
Output Voltage5V
Number of Outputs1
Operating Temperature-40℃~+125℃
Supply Current (Iq)120uA
Output ConfigurationPositive
Operating Voltage6V
Output Current1.5A
FeaturesEnable control;Operating status indication;Short Circuit Protection;Thermal shutdown;Over Current Protection;Input under-voltage protection
Output TypeFixed
Aiuto & FeedbackMostra prodotti simili (0) >

Descrizione

Traduzione AI

A 1.5A Low Dropout (LDO) linear regulator that provides high current and low output voltages in a very small package. Comes in a fixed (or adjustable) output voltage version, with an output voltage range of 0.8V to 5.0V. The 1.5A output current capability, combined with the low output voltage capability, makes it a good choice for new sub - 1.8V output voltage LDO applications that have high current demands. It is stable using ceramic output capacitors that inherently provide lower output noise and reduce the size and cost of the entire regulator solution. Only 1μF of output capacitance is needed to stabilize the LDO. Using CMOS construction, the quiescent current consumed is typically less than 120μA over the entire input voltage range, making it attractive for portable computing applications that demand high output current. When shut down, the quiescent current is reduced to less than 0.1μA. The scaled - down output voltage is internally monitored and a power good (PWRGD) output is provided when the output is within 92% of regulation (typical). An external capacitor can be used on the CDELAY pin to adjust the delay from 200μs to 300ms. The overtemperature and short circuit current - limiting provide additional protection for the LDO during system fault conditions.

Caratteristiche

Traduzione AI
  • 1.5A Output Current Capability
  • Input Operating Voltage Range: 2.3V to 6.0V
  • Adjustable Output Voltage Range: 0.8V to 5.0V
  • Standard Fixed Output Voltages: - 0.8V, 1.2V, 1.8V, 2.5V, 3.0V, 3.3V, 5.0V
  • Other Fixed Output Voltage Options Available Upon Request
  • Low Dropout Voltage: 330mV typical at 1.5A
  • Typical Output Voltage Tolerance: 0.5%
  • Stable with 1.0μF Ceramic Output Capacitor
  • Fast response to Load Transients
  • Low Supply Current: 120μA (typical)
  • Low Shutdown Supply Current: 0.1μA (typical)
  • Adjustable Delay on Power Good Output
  • Short Circuit Current Limiting and Overtemperature Protection
  • 3mm×3mm DFN - 8 and SOIC - 8 Package Options
  • Passes Automotive AEC - Q100 Reliability Testing

Applicazioni

Traduzione AI
  • High - Speed Driver Chipset Power
  • Networking Backplane Cards
  • Notebook Computers
  • Network Interface Cards
  • Palmtop Computers
  • 2.5V to 1.XV Regulators