RENESAS 5P1105A000NLGI8

The 5P1105 is a programmable fanout buffer intended for high performance consumer, networking, industrial, computing, and data-communications applications. Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using I²C interface. The outputs are generated from a single reference clock. The reference clock can come from one of the two redundant clock inputs. A glitchless manual switchover function allows one of the redundant clocks to be selected during normal operation. Two select pins allow up to 4 different configurations to be programmed and accessible using processor GPIOs or bootstrapping. The different selections may be used for different operating modes (full function, partial function, partial power-down), regional standards (US, Japan, Europe) or system production margin testing. The device may be configured to use one of two I²C addresses to allow multiple devices to be used in a system.

• Up to four high performance universal differential output pairs – Low RMS additive phase jitter: 0.2ps
• Four banks of internal non-volatile in-system programmable or factory programmable OTP memory
• I²C serial programming interface
• One additional LVCMOS output clock
• Four universal output pairs: – Each configurable as one differential output pair or two LVCMOS outputs
• I/O Standards: – Single-ended I/Os: 1.8V to 3.3V LVCMOS – Differential I/Os - LVPECL, LVDS and HCSL
• Input frequency ranges: – LVCMOS Reference Clock Input (XIN/REF) – 1MHz to 200MHz – LVDS, LVPECL, HCSL Differential Clock Input (CLKIN, CLKINB) – 1MHz to 350MHz – Crystal frequency range: 8MHz to 40MHz
• Individually selectable output voltage (1.8V, 2.5V, 3.3V) for each output pair
• Redundant clock inputs with manual switchover
• Programmable crystal load capacitance
• Individual output enable/disable
• Power-down mode
• 1.8V, 2.5V or 3.3V core VDDD, VDDA
• Available in 24-pin VFQFPN 4mm x 4mm package
• -40°C to +85°C industrial temperature operation

• Ethernet switch/router
• PCI Express 1.0/2.0/3.0
• Broadcast video/audio timing
• Multi-function printer
• Processor and FPGA clocking
• MSAN/DSLAM/PON
• Fiber Channel, SAN
• Telecom line cards
• 1 GbE and 10 GbE