Name: American Opto Plus LED A801SR G/W
Brand: American Opto Plus LED
SKU: C5933685
Price: 0.494 USD
Availability: OutOfStock

Recommended storage conditions: max humidity 60%RH, temperature 5℃~40℃ (41°F~105°F)
Shelf life in sealed bag: 3 months at temperature below 40℃ and humidity 90%RH
Lead forming must be completed before soldering, not during or after
Avoid applying any stress to the resin to prevent epoxy cracking and bond wire damage
During forming, use a lead-cutting tool or similar device to secure or bend leads
Minimum distance from resin base to lead bend point: 2mm
Avoid bending leads twice or more at the same point
Do not apply stress to leads while heated, as this may cause disconnection
When mounting LEDs on PCB, carefully align the pitch to avoid stress on lead wires
SMD LEDs and displays should be mounted with electrode orientation perpendicular to the PCB bending direction
Do not bend PCB after soldering
Avoid cleaning LEDs with unspecified chemical solvents such as trichloroethylene, chlorothene, acetone, and Difluron S3MC
If cleaning is required, any cleaning method should be performed at room temperature for no more than 1 minute
Exercise special caution when cleaning with chemicals, as some may damage the epoxy resin surface

Recommended storage conditions: max humidity 60%RH, temperature 5℃~40℃ (41°F~105°F)
Shelf life in sealed bag: 3 months at temperature below 40℃ and humidity 90%RH
Lead forming must be completed before soldering, not during or after
Avoid applying any stress to the resin to prevent epoxy cracking and bond wire damage
During forming, use a lead-cutting tool or similar device to secure or bend leads
Minimum distance from resin base to lead bend point: 2mm
Avoid bending leads twice or more at the same point
Do not apply stress to leads while heated, as this may cause disconnection
When mounting LEDs on PCB, carefully align the pitch to avoid stress on lead wires
SMD LEDs and displays should be mounted with electrode orientation perpendicular to the PCB bending direction
Do not bend PCB after soldering
Avoid cleaning LEDs with unspecified chemical solvents such as trichloroethylene, chlorothene, acetone, and Difluron S3MC
If cleaning is required, any cleaning method should be performed at room temperature for no more than 1 minute
Exercise special caution when cleaning with chemicals, as some may damage the epoxy resin surface

Produttore	American Opto Plus LED
Cod. Prod.	A801SR G/W
Cod. LCSC	C5933685
Imballo	DIP-13
Numero Cliente
Attr. chiave	Red 72mW 1 Common Anode 0.8 DIP-13 LED Character and Numeric RoHS
Scheda Tecnica	American Opto Plus LED A801SR G/W
Parti alternative	5

Tipo	Descrizione
Categoria	Optoelectronics/LED Character and Numeric
Produttore	American Opto Plus LED
Imballo	DIP-13
Illumination Color	Red
Pd - Power Dissipation	72mW
Display Type	7 Segment
Number of Characters	1
LED Polarity	Common Anode
Operating Temperature	-40℃~+85℃
Height	-
Digit/Alpha Size(inch)	0.8
Width	-
Length	-
Forward Voltage Drop	1.75V
Light Intensity	24mcd

Tipo	Descrizione
Categoria	Optoelectronics/LED Character and Numeric
Produttore	American Opto Plus LED
Imballo	DIP-13
Illumination Color	Red
Pd - Power Dissipation	72mW
Display Type	7 Segment
Number of Characters	1
LED Polarity	Common Anode

American Opto Plus LED A801SR G/W

Specifiche del Prodotto

MPN	Produttore	Tipo alternativo	Imballaggio	Prezzo unitario
LTS-3401LWC	LITEON	Simili	DIP-13	$ 0.6318
XDMDK20A-1	SunLED	Simili	DIP-13	$ 3.5597
NTE3080	NTE Electronics	Simili	DIP-13	$ 9.8017
LDS-A816RI	Lumex	Simili	DIP-13	$ 3.0157
LDS-A814RI	Lumex	Simili	DIP-13	$ 2.1154