LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Warenkorb
FITIPOWER FP6714S6CTR product image
  • FP6714S6CTR thumbnail 1
  • FP6714S6CTR thumbnail 2
  • FP6714S6CTR thumbnail 3
  • Pinbelegung
  • Footprint
Abbildung ähnlich

FITIPOWER FP6714S6CTR

Hersteller
FITIPOWERAsian Brands
Herst.-Teilenr.
FP6714S6CTR
LCSC-Nr.
C389170
Verp.
SOT-23-6
Kundennummer
Hauptmerkm.
High-Efficiency, 1-Cell and 2-Cell Boost Converter
DatenblattFITIPOWER FP6714S6CTR
RoHS-Konformität1 Dokumente verfügbar
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch
Nicht vorrätig
Benachrichtigen
Minimum: 5Vielfaches: 5Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
5+$ 0.116$ 0.58
50+$ 0.0907$ 4.54
150+$ 0.078$ 11.70
500+$ 0.0685$ 34.25
3,000+$ 0.0609$ 182.70
6,000+$ 0.0571$ 342.60
Standardgehäuse3000/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - DC DC Switching Regulators
HerstellerFITIPOWER
Verp.SOT-23-6
Operating Temperature-40℃~+85℃
Frequency - Switching1MHz
FunctionBoost
Number of Outputs1
FeaturesCycle-by-cycle current limiting;Load disconnect;Light load efficient mode;Built-in current sense resistor
Output TypeAdjustable
TopologyBoost
Operating Voltage850mV~3.8V
Switch tube (built-in/external)Built-in
Output Voltage1.8V~3.8V
Output Current750mA
Quiescent Current25uA
Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >

Beschreibung

KI-Übersetzung

The FP6714 is a high efficiency, fixed frequency 1.0MHz, current mode PWM boost DC/DC converter which could operate from single/dual-cell NiCd, NiMH or alkaline battery such as input voltage below 1V. The converter output voltage can be adjusted from 1.8V to a maximum of 3.8V by an external resistor divider. Besides the converter includes a 0.25Ω N-channel MOSFET switch and 0.35Ω P-channel synchronous rectifier. So no external Schottky diode is required and could get better efficiency near 94%. The converter is based on a fixed frequency, current mode, pulse-width-modulation PWM controller that goes automatically into PSM mode at light load which quiescent current is only 25μA in this mode operation. When converter operation into discontinuous mode, the internal anti-ringing switch will reduce interference and radiated electromagnetic energy. The FP6714 is available in a space-saving SOT-23-6 & TSOT-23-6 packages for portable application.

Merkmale

KI-Übersetzung
  • Synchronous Rectification: 94% Efficiency
  • Very Low Start-up Voltage at 0.85V
  • Automatically Switch to PSM Mode for Improving Efficiency at Light Load
  • Internal Anti-Ringing Switch Across Inductor
  • Fixed Frequency Operation at 1.0MHz
  • Very Low Shutdown Current at 1μA
  • Small SOT-23-6 & TSOT-23-6 Packages
  • RoHS Compliant

Anwendungen

KI-Übersetzung
  • Handheld Instrument
  • Cordless Phone
  • Wireless Handset
  • GPS Receiver
  • MP3