ST BLUENRG-345MC

The BlueNRG-LP is an ultra-low power programmable Bluetooth Low Energy wireless SoC solution. It embeds state-of-art 2.4 GHz RF radio IPs combining unparalleled performance with extremely long battery lifetime. It is compliant with Bluetooth Low Energy SIG core specification version 5.2 addressing point-to-point connectivity and Bluetooth Mesh networking and allows large-scale device networks to be established in a reliable way. The BlueNRG-LP is also suitable for 2.4 GHz proprietary radio wireless communication to address ultra-low latency applications. It embeds a Cortex -M0+ microcontroller that can operate up to 64 MHz and also the BlueNRG core coprocessor (DMA based) for Bluetooth Low Energy timing critical operations. 2 Mbps data rate, long range (Coded PHY), advertising extensions, channel selection algorithm #2, GATT caching, hardware support for simultaneous connection, master/slave and multiple roles simultaneously, extended packet length support. In addition, the BlueNRG-LP provides enhanced security hardware support by dedicated hardware functions: True random number generator (RNG), encryption AES maximum 128-bit security co-processor, public key accelerator (PKA), CRC calculation unit, 64-bit unique ID, Flash memory read and write protection. The BlueNRG-LP can be configured to support standalone or network processor applications. In the first configuration, the BlueNRG-LP operates as single device in the application for managing both the application code and the Bluetooth Low Energy stack. It embeds high-speed and flexible memory types: Flash memory of 256 kB, RAM memory of 64 KB, one-time-programmable (OTP) memory area of 1 kB, ROM memory of 7 kB. Direct data transfer between memory and peripherals and from memory-to-memory is supported by eight DMA channels with a full flexible channel mapping by the DMAMUX peripheral. It embeds a 12-bit ADC, allowing measurements of up to eight external sources and up to three internal sources, including battery monitoring and a temperature sensor. It has a low-power RTC and one advanced 16-bit time It features standard and advanced communication interfaces: 1x SPI, 2x SPI/I2S, 1x LPUART, 1x USART supporting ISO 7816 (smartcard mode), IrDA and Modbus mode, 2x I2C supporting SMBus/PMBus, 1x channel PDM. It operates in the -40 to +105 °C temperature range.

• Bluetooth Low Energy system-on-chip supporting Bluetooth 5.2
• 2 Mbps data rate
• Long range (Coded PHY)
• Advertising extensions
• Channel selection algorithm #2
• GATT caching
• LE Ping procedure
• Periodic advertising and periodic advertising sync transfer
• LE L2CAP connection-oriented channel
• LE power control and path loss monitoring
• Radio RX sensitivity level: -97 dBm @ 1 Mbps, -104 dBm @ 125 kbps (long range)
• Programmable output power up to +8 dBm (at antenna connector)
• Data rate supported: 2 Mbps, 1 Mbps, 500 kbps and 125 kbps
• 128 physical connections
• Integrated balun
• Support for external PA
• BlueNRG core coprocessor (DMA based) for Bluetooth Low Energy timing critical operation
• 2.4 GHz proprietary radio driver
• Suitable for systems requiring compliance with the following radio frequency regulations: ETSI EN 300 328, EN 300 440, FCC CFR47 part 15, ARIB STD-T66
• Ultra-low power radio performance
• 10 nA in SHUTDOWN mode (1.8 V)
• 0.6 uA in DEEPSTOP mode (with external LSE and BLE wake-up sources, 1.8 V)
• 0.9 uA in DEEPSTOP mode (with internal LSI and BLE wake-up sources, 1.8 V)
• 4.3 mA peak current in TX (@ 0 dBm, 3.3 V)
• 3.4 mA peak current in RX (@ sensitivity level, 3.3V)
• High performance and ultra-low power Cortex -M0+ 32-bit, running up to 64 MHz
• Dynamic current consumption: 18 μA/MHz
• Operating supply voltage: from 1.7 to 3.6 V
• -40 °C to 105 °C temperature range
• Supply and reset management
• High efficiency embedded SMPS step-down converter with intelligent bypass mode
• Ultra-low power power-on-reset (POR) and power-down-reset (PDR)
• Programmable voltage detector (PVD)
• Clock sources
• Fail safe 32 MHz crystal oscillator with integrated trimming capacitors
• 32 kHz crystal oscillator
• Internal low-power 32 kHz RO
• On-chip non-volatile Flash memory of 256 kB
• On-chip RAM of 64 kB or 32 kB
• One-time-programmable (OTP) memory area of 1 kB
• Embedded UART bootloader
• Ultra-low power modes with or without timer and RAM retention
• Quadrature decoder
• Enhanced security mechanisms such as: Flash read/write protection, SWD disabling, Secure bootloader
• Security features
• True random number generator (RNG)
• Hardware encryption AES maximum 128-bit security co-processor
• HW public key accelerator (PKA)
• CRC calculation unit
• 64-bit unique ID
• System peripherals
• 1x DMA controller with 8 channels supporting ADC, SPI, I2C, USART and LPUART
• 1x SPI
• 2x SPI/I2S
• 2x I2C (SMBus/PMBus)
• 1x PDM (digital microphone interface)
• 1x LPUART
• 1x USART (ISO 7816 smartcard mode, IrDA, SPI Master and Modbus)
• 1x independent WDG
• 1x real time clock (RTC)
• 1x independent SysTick
• 1x 16-bit, 6 channel advanced timer
• Up to 32 fast I/Os
• 28 of them with wake-up capability
• 31 of them 5 V tolerant
• Analog peripherals
• 12-bit ADC with 8 input channels, up to 16 bits with a decimation filter
• Battery monitoring
• Analog watchdog
• Analog Mic I/F with PGA
• Development support
• Serial wire debug (SWD)
• 4 breakpoints and 2 watchpoints
• All packages are ECOPACK2 compliant

• Industrial
• Home and industrial automation
• Smart lighting
• Fitness, wellness and sports
• Healthcare, consumer medical
• Security/proximity
• Remote control
• Assisted living
• Mobile phone peripherals
• PC peripherals