LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
TI SNJ54LS153J product image
Immagini a scopo illustrativo

TI SNJ54LS153J

Produttore
Cod. Prod.
SNJ54LS153J
Cod. LCSC
C3210388
Imballo
CDIP-16
Numero Cliente
Attr. chiave
4.5V~5.5V 6.2mA 38ns@5V,15pF Short-Circuit Protection CDIP-16 Signal Switches, Multiplexers, Decoders
Scheda TecnicaTI SNJ54LS153J
Garanzia su ogni ordine
100% Autentico · Reso o Sostituzione entro 30 Giorni
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.(Solo per riferimento)Importo totale
1+$ 13.1023$ 13.10
200+$ 5.0703$ 1014.06
500+$ 4.8928$ 2446.40
1,000+$ 4.804$ 4804.00
Package Standard25/Full Tube
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Logic/Signal Switches, Multiplexers, Decoders
ProduttoreTI
ImballoCDIP-16
Type-
Series74LS
Voltage - Supply4.5V~5.5V
Number of Channels-
Operating Temperature-55℃~+125℃
Quiescent Current6.2mA
Current - Output High(IOH)400uA
Propagation Delay38ns@5V,15pF
Current - Output Low(IOL)4mA
FunctionShort-Circuit Protection

Descrizione

Traduzione AI

Each of these monolithic, data selectors/multiplexers contains inverters and drivers to supply fuly complementary, on-chip, binary decoding data selection to the AND-OR gates. Separate strobe inputs are provided for each af the two four-line sections.

Caratteristiche

Traduzione AI
  • N-line to 1-line multiplexing
  • Parallel-to-serial conversion
  • Strobe enable line for cascading expansion, enabling N-line to n-line multiplexing
  • High fan-out, low-impedance totem-pole outputs
  • Fully compatible with most TTL circuits
  • Select inputs A and B are common to both sections; logic definition: H = HIGH, L = LOW, X = don't care
  • Maximum rated supply voltage VCC: 7V
  • 153 and S153: maximum rated input voltage 5.5V; LS153: maximum rated input voltage 7V
  • Free-air operating temperature range: SN54 series −55℃ to 125℃, SN74 series 0℃ to 70℃
  • Storage temperature range: −65℃ to 150℃
  • Typical parameter test conditions: VCC = 5V, TA = 25℃
  • Usage requirement: no more than one output shorted at a time; for certain models, short-circuit duration must not exceed 1 second