LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
TI LM536013QUDSXRQ1 product image
Abbildung ähnlich

TI LM536013QUDSXRQ1

Hersteller
Herst.-Teilenr.
LM536013QUDSXRQ1
LCSC-Nr.
C2876323
Verp.
WSON-10-EP(3x3)
Kundennummer
Hauptmerkm.
2.1MHz Step-down type Fixed 1A 3.23V~3.37V WSON-10-EP(3x3) Voltage Regulators - DC DC Switching Regulators
DatenblattTI LM536013QUDSXRQ1
Alternativteile5
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 7.2393$ 7.24
200+$ 2.8016$ 560.32
500+$ 2.7033$ 1351.65
1,000+$ 2.6541$ 2654.10
Standardgehäuse3000/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - DC DC Switching Regulators
HerstellerTI
Verp.WSON-10-EP(3x3)
Operating Temperature-40℃~+150℃
Frequency - Switching2.1MHz
Number of Outputs1
FunctionStep-down type
FeaturesEMI optimization (spread spectrum);Frequency synchronization;Light load efficient mode;Overcurrent Protection
Output TypeFixed
TopologyBuck
Operating Voltage3.55V~36V
Switch tube (built-in/external)Built-in
Output Current1A
Output Voltage3.23V~3.37V
Quiescent Current23uA

Beschreibung

KI-Übersetzung

The LM53600-Q1 and LM53601-Q1 synchronous buck regulator devices are optimized for automotive applications, capable of providing 5V, 3.3V, or adjustable output voltages. The LM53600-Q1 supports load currents up to 650mA, while the LM53601-Q1 supports load currents up to 1000mA. Both devices utilize advanced high-speed circuitry to achieve regulated output from 18V input to 3.3V output at a fixed frequency of 2.1MHz. These devices feature an innovative architecture that delivers a regulated 3.3V output even at input voltages as low as 3.8V. The input voltage can reach up to 36V, with a maximum allowable transient voltage of 42V, simplifying input surge protection design. The open-drain reset output with filtering and delayed release provides accurate system status indication. This feature eliminates the need for additional monitoring components, saving cost and board space. Both devices seamlessly switch between PWM and PFM modes with a quiescent current of only 23μA, ensuring high efficiency and excellent transient response under all load conditions. Minimal external components are required, enabling a more compact PCB layout. Although the LM53600-Q1 and LM53601-Q1 devices are Q1-grade, electrical characteristics are guaranteed over a junction temperature range of –40°C to 150°C.

Merkmale

KI-Übersetzung
  • Automotive-grade, AEC-Q100 qualified
  • Junction temperature range: -40°C to 150°C (available)
  • Wide input voltage range: 3.55V to 36V (transient up to 42V)
  • Spread spectrum option available
  • 2.1MHz fixed switching frequency
  • Low quiescent current: 23μA
  • Shutdown current: 1.8μA
  • Adjustable, 3.3V, or 5V output options
  • Maximum load current: 650mA (LM53600-Q1), 1000mA (LM53601-Q1)
  • Pin-selectable forced PWM mode
  • RESET output with filtering and delayed release
  • External frequency synchronization
  • Internal compensation, soft-start, current limiting, and UVLO
  • 10-pin 3mm x 3mm SON package with wettable flanks and non-wettable flanks options

Anwendungen

KI-Übersetzung
  • Automotive camera applications
  • Automotive driver assistance systems
  • Automotive body applications

Alternativteile

MPNHerstellerAlternativtypVerpackungVerfügbarkeitStückpreis
LM536013QDSXTQ1TIÄhnlicheWSON-10-EP(3x3)15$ 4.9955
LM53601NQDSXRQ1TIÄhnlicheWSON-10-EP(3x3)9$ 6.367
LM53601NQDSXTQ1TIÄhnlicheWSON-10-EP(3x3)0$ 8.4204
LM536013QDSXRQ1TIÄhnlicheWSON-10-EP(3x3)0$ 2.386
A8591KEJTR-J-1ALLEGROÄhnlicheDFN-10(3x3)0$ 3.3822