Abbildung ähnlich
EDA-ModelleEasyEDA
MAXIM MAX792SESE+T
| Hersteller | |
| Herst.-Teilenr. | MAX792SESE+T |
| LCSC-Nr. | C2070404 |
| Verp. | SOIC-16 |
| Kundennummer | |
| Hauptmerkm. | 140ms 2.75V~5.5V 1 SOIC-16 Supervisors RoHS |
| Datenblatt | MAXIM MAX792SESE+T |
| RoHS-Konformität | 1 Dokumente verfügbar |
Produktspezifikationen
Alle
| Typ | Beschreibung | |
|---|---|---|
| Kategorie | Integrated Circuits (ICs)/Power Management (PMIC)/Supervisors | |
| Hersteller | MAXIM | |
| Verp. | SOIC-16 | |
| Reset Timeout | 140ms | |
| output type | Push-pull | |
| Operating Temperature | -40℃~+85℃@(TA) | |
| Function | - | |
| Reset Active Level | Active High;Active Low | |
| standby current | 70uA | |
| Voltage - Supply | 2.75V~5.5V | |
| ChipType | Simple Reset/Power-On Reset | |
| Threshold Voltage | 2.91V | |
| Number of Voltages Monitored | 1 |
| Typ | Beschreibung | |
|---|---|---|
| Kategorie | Integrated Circuits (ICs)/Power Management (PMIC)/Supervisors | |
| Hersteller | MAXIM | |
| Verp. | SOIC-16 | |
| Reset Timeout | 140ms | |
| output type | Push-pull | |
| Operating Temperature | -40℃~+85℃@(TA) | |
| Function | - |
| Typ | Beschreibung | |
|---|---|---|
| Reset Active Level | Active High;Active Low | |
| standby current | 70uA | |
| Voltage - Supply | 2.75V~5.5V | |
| ChipType | Simple Reset/Power-On Reset | |
| Threshold Voltage | 2.91V | |
| Number of Voltages Monitored | 1 |
Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >
Merkmale
KI-Übersetzung
- µP reset: Assertion of RESET and RESET outputs during power-up, power-down, and brownout conditions. RESET is guaranteed valid for VCC down to 1V.
- Manual-reset input.
- Two-stage power-fail warning: A separate low-line comparator compares VCC to a preset threshold 120mV above the reset threshold; the low-line and reset thresholds can be programmed externally.
- Watchdog fault output: Assertion of WDO if the watchdog input is not toggled within a preset timeout period.
- Pulsed watchdog output: Advance warning of impending WDO assertion from watchdog timeout that causes hardware shutdown.
- Write protection of CMOS RAM, EEPROM, or other memory devices.
- The MAX792 and MAX820 are identical, except the MAX820 guarantees higher low-line and reset threshold accuracy (±2%).
Anwendungen
KI-Übersetzung
- Computers
- Controllers
- Intelligent Instruments
- Critical µP Power Monitoring
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
| Stk. | E-Preis(Nur als Referenz) | Gesamtbetrag |
|---|---|---|
| 1+ | $ 6.8935 | $ 6.89 |
| 200+ | $ 2.6688 | $ 533.76 |
| 500+ | $ 2.5747 | $ 1287.35 |
| 1,000+ | $ 2.5284 | $ 2528.40 |
Standardgehäuse2500/Full Reel | ||
Besserer Preis bei größerer Menge?
$
Produktspezifikationen
Alle
| Typ | Beschreibung | |
|---|---|---|
| Kategorie | Integrated Circuits (ICs)/Power Management (PMIC)/Supervisors | |
| Hersteller | MAXIM | |
| Verp. | SOIC-16 | |
| Reset Timeout | 140ms | |
| output type | Push-pull | |
| Operating Temperature | -40℃~+85℃@(TA) | |
| Function | - | |
| Reset Active Level | Active High;Active Low | |
| standby current | 70uA | |
| Voltage - Supply | 2.75V~5.5V | |
| ChipType | Simple Reset/Power-On Reset | |
| Threshold Voltage | 2.91V | |
| Number of Voltages Monitored | 1 |
| Typ | Beschreibung | |
|---|---|---|
| Kategorie | Integrated Circuits (ICs)/Power Management (PMIC)/Supervisors | |
| Hersteller | MAXIM | |
| Verp. | SOIC-16 | |
| Reset Timeout | 140ms | |
| output type | Push-pull | |
| Operating Temperature | -40℃~+85℃@(TA) | |
| Function | - |
| Typ | Beschreibung | |
|---|---|---|
| Reset Active Level | Active High;Active Low | |
| standby current | 70uA | |
| Voltage - Supply | 2.75V~5.5V | |
| ChipType | Simple Reset/Power-On Reset | |
| Threshold Voltage | 2.91V | |
| Number of Voltages Monitored | 1 |
Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >
Merkmale
KI-Übersetzung
- µP reset: Assertion of RESET and RESET outputs during power-up, power-down, and brownout conditions. RESET is guaranteed valid for VCC down to 1V.
- Manual-reset input.
- Two-stage power-fail warning: A separate low-line comparator compares VCC to a preset threshold 120mV above the reset threshold; the low-line and reset thresholds can be programmed externally.
- Watchdog fault output: Assertion of WDO if the watchdog input is not toggled within a preset timeout period.
- Pulsed watchdog output: Advance warning of impending WDO assertion from watchdog timeout that causes hardware shutdown.
- Write protection of CMOS RAM, EEPROM, or other memory devices.
- The MAX792 and MAX820 are identical, except the MAX820 guarantees higher low-line and reset threshold accuracy (±2%).
Anwendungen
KI-Übersetzung
- Computers
- Controllers
- Intelligent Instruments
- Critical µP Power Monitoring
C2070404 EasyEDA-Bibliothek
Compliance & Exportcodes
| Typ | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Typ | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Typ | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |