LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
ATGBICS by Approved Technology Ltd AFBR-79EIDZ-OR2-C product image
Abbildung ähnlich

ATGBICS by Approved Technology Ltd AFBR-79EIDZ-OR2-C

Hersteller
Herst.-Teilenr.
AFBR-79EIDZ-OR2-C
LCSC-Nr.
C17225445
Verp.
-
Kundennummer
Hauptmerkm.
Fiber Optic Transceiver Modules RoHS
DatenblattATGBICS by Approved Technology Ltd AFBR-79EIDZ-OR2-C
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 169.7333$ 169.73
200+$ 67.7251$ 13545.02
500+$ 65.4617$ 32730.85
1,000+$ 64.3443$ 64344.30
Standardgehäuse1/Full Tray
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle

Beschreibung

KI-Übersetzung

AFBR-79EIDZ-OR2-C is a parallel 40Gbps Quad Small Form-factor Pluggable (QSFP) optical transceiver module designed to increase port density and reduce total system cost. This QSFP full-duplex optical module provides 4 independent transmit and receive channels, each capable of operating at 10Gbps, delivering a total bandwidth of 40Gbps over OM3 MMF with a reach of up to 70m, and up to 150m over OM4 MMF.

Fiber ribbon cables with MPO/MTP connectors on both ends are inserted into the QSFP module receptacle. The ribbon cable orientation is "keyed," and guide pins inside the module receptacle ensure proper alignment. Cables are typically non-twisted (key-up to key-up) to ensure correct inter-channel alignment. Electrical connection is achieved via a z-style pluggable 38-pin IPASS connector.

The module is powered by a single +3.3V supply and provides LVCMOS/LVTTL global control signals including module present, reset, interrupt, and low-power mode. A two-wire serial interface is provided for transmitting and receiving more complex control signals and accessing digital diagnostic information. Individual channels can be addressed, and unused channels can be disabled for maximum design flexibility.

The AFBR-79EIDZ-OR2-C is designed in accordance with the QSFP Multi-Source Agreement (MSA) for form factor, optical/electrical interface, and digital diagnostics interface. It is intended to withstand the most severe external operating conditions, including temperature, humidity, and EMI. The module features a very high level of functionality and feature integration, accessible via the two-wire serial interface.

Merkmale

KI-Übersetzung
  • 4 independent full-duplex channels, each with bandwidth up to 11.2Gbps
  • Total bandwidth > 40Gbps
  • MTP/MPO optical connector
  • QSFP MSA compliant
  • Digital diagnostics capability
  • CML-compatible electrical I/O
  • Single +3.3V power supply
  • TX input and RX output CDR retiming
  • Built-in digital diagnostics
  • Temperature range 0°C ~ 70°C
  • RoHS compliant

Anwendungen

KI-Übersetzung
  • Rack-to-rack data center
  • Metro area network
  • Switches and routers
  • InfiniBand 4x SDR, DDR, QDR