LCSC Electronics logoLCSC Electronics svg logo
Zaloguj
USD
Koszyk
TI TPS92691QPWPQ1 product image
Zdjęcia poglądowe

TI TPS92691QPWPQ1

Producent
TI
Nr części prod.
TPS92691QPWPQ1
Nr LCSC
C1554334
Opak.
HTSSOP-16-EP
Numer Klienta
Klucz. cechy
80kHz~700kHz 1 DC-DC 2V~65V 4.5V~65V HTSSOP-16-EP LED Drivers RoHS
Karta KatalogowaTI TPS92691QPWPQ1
Zgodność z RoHS1 dokumentów dostępnych
Gwarancja na każde zamówienie
100% Oryginalne · Zwrot lub Wymiana w ciągu 30 Dni
Brak w magazynie
Powiadom mnie
Minimum: 1Wielokrotność: 1Jednostka sprzedaży: Piece
Dodaj do Listy BOM
Szt.Cena jedn.(Tylko do wglądu)Suma całkowita
1+$ 2.9199$ 2.92
10+$ 2.5034$ 25.03
30+$ 2.2551$ 67.65
100+$ 2.0052$ 200.52
Standardowa Obudowa90/Full Tube
Lepsza cena za większą ilość?
$

Specyfikacje Produktu

Wszystko
TypOpis
KategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/LED Drivers
ProducentTI
Opak.HTSSOP-16-EP
Frequency - Switching80kHz~700kHz
DimmingPWM;Analog
Voltage - Input(AC)-
Number of Channels1
TypeDC-DC
Switch tube (built-in/external)External
Output Voltage2V~65V
Output Current-
Operating Temperature-40℃~+125℃
FeaturesOver Voltage Protection;Built-in soft-start;Short Circuit Protection;LED open-circuit protection;Over-Temperature Protection (OTP)
TopologyBoost;Buck
Voltage - Input(DC)4.5V~65V
Constant Current Accuracy3%
Pomoc i opiniePokaż podobne produkty (0) >

Opis

Tłumaczenie AI

The TPS92691/-Q1 is a general-purpose LED controller that supports a range of boost or buck driver topologies. The device implements a fixed-frequency peak current mode control technique with programmable switching frequency, ramp compensation, and soft-start timing. It integrates a high-voltage (65V) rail-to-rail current sense amplifier, enabling direct measurement of LED current using a high-side or low-side series sense resistor. This amplifier can be used to achieve a low input offset voltage and an LED current accuracy better than ±3% over a junction temperature range of 25°C to 140°C and an output common-mode voltage range of 0 to 60V. LED current can be individually modulated using either analog or PWM dimming techniques. A linear analog dimming response with a 15:1 range can be obtained by varying the voltage from 140mV to 2.25V across the high-impedance analog adjustment input (IADJ). PWM dimming of the LED current is achieved by modulating the PWM input pin to the desired duty cycle and frequency. An optional DDRV gate driver output can be used to enable series FET dimming with a contrast ratio greater than 1000:1. The TPS92691/-Q1 supports continuous monitoring of the LED status through a current monitor output. This enables LED short-circuit or open-circuit detection and protection. Other fault protection features include VCC UVLO, output overvoltage protection (OVP), switch cycle-by-cycle current limit, and thermal protection.

Funkcje

Tłumaczenie AI
  • Wide input voltage range: 4.5V to 65V
  • Wide output voltage range: 2V to 65V
  • Low input offset rail-to-rail current sense amplifier
  • LED current accuracy better than ±3% over junction temperature range of 25°C to 140°C
  • Compatible with high-side and low-side current sense elements
  • High-impedance analog LED current regulation input (IADJ) with contrast ratio greater than 15:1
  • Greater than 1000:1 series FET PWM dimming ratio using integrated series N-channel dimming driver interface
  • LED current continuous monitoring output for system fault detection and diagnostics
  • Programmable switching frequency for synchronization with external clock
  • TPS92691-Q1: Qualified to automotive Q100 Grade 1

Zastosowania

Tłumaczenie AI
  • TPS92691-Q1: Automotive exterior lighting applications
  • Architectural and general lighting applications