LCSC Electronics logoLCSC Electronics svg logo
Iniciar sesión
USD

RENESAS ISL89165FBEAZ-T

Fabricante
N.º de pieza fab.
ISL89165FBEAZ-T
Nº LCSC
C1549414
Emb.
SOIC-8-EP
Número de Cliente
Atrib. clave
4.5V~16V 6A 6A SOIC-8-EP Gate Drivers RoHS
Hoja de DatosRENESAS ISL89165FBEAZ-T
Garantía en cada pedido
100% Auténtico · Devolución o Reemplazo en 30 Días

Especificaciones del Producto

Todo
TipoDescripción
CategoríaIntegrated Circuits (ICs)/Power Management (PMIC)/Gate Drivers
FabricanteRENESAS
Emb.SOIC-8-EP
Input Logic Level - Low1.12V~1.32V
Low Level Delay Time-
High Level Delay Time-
Quiescent Current5mA
Input Logic Level - High1.98V~2.18V
Voltage - Supply4.5V~16V
Operating Temperature-40℃~+125℃
Driven Configuration-
Current - Output Low(IOL)6A
Rise Time20ns
Fall Time20ns
FeaturesDead-time control;Interleaved conduction protection
Current - Output High(IOH)6A
Load TypeMOSFET

Descripción

Traducción por IA

The ISL89163, ISL89164, and ISL89165 are high-speed, 6A, dual channel MOSFET drivers with enable inputs. Precision thresholds on all logic inputs allow the use of external RC circuits to generate accurate and stable time delays on both the main channel inputs, INA and INB, and the enable inputs, ENA and ENB. The precision delays capable of these precise logic thresholds make these parts valuable for dead time control and synchronous rectifiers. Note, the enable and input logic inputs can be interchanged for alternate logic implementations. Three input logic thresholds are available: 3.3V (CMOS), 5.0V (CMOS or TTL compatible), CMOS thresholds that are proportional to VDD. At high switching frequencies, these MOSFET drivers use a minimal amount of internal bias currents. Separate, non-overlapping drive circuits are used to drive each CMOS output FET to prevent shoot-through currents in the output stage. The start-up sequence is designed to prevent unexpected glitches when VDD is being turned on or turned off. When VDD < ~1V, an internal 10kΩ resistor between the output and ground helps to keep the output voltage low. When ~1V < VDD < UVLO: both outputs are driven low with significantly low resistance as the logic inputs are ignored, which ensures that the driven FETs are off. When VDD > UVLO, and after a short delay, the outputs begin to respond to the logic inputs.

Características

Traducción por IA
  • Dual output, 6A peak currents, can be paralleled
  • Dual AND-ed input logic, (input and enable)
  • Typical ON-resistance < 1Ω
  • Specified Miller plateau drive currents
  • Very low thermal impedance (θJC = 3°C/W)
  • Hysteretic Input logic levels for 3.3V CMOS, 5V CMOS, TTL, and Logic levels proportional to VDD
  • Precision threshold inputs for time delays with external RC components
  • 20ns rise and fall time driving a 10nF load.

Aplicaciones

Traducción por IA
  • Synchronous Rectifier (SR) driver
  • Switch mode power supplies
  • Motor drives, Class D amplifiers, UPS, inverters
  • Pulse transformer driver
  • Clock/line driver