LCSC Electronics logoLCSC Electronics svg logo
Connexion
USD

Infineon/CYPRESS CY7C4201-25JC

Fabricant
Réf. Fab.
CY7C4201-25JC
Réf. LCSC
C2954813
Condit.
PLCC-32(11.43x13.97)
Numéro Client
Caract. clés
15ns 512x9 35mA 4.5V~5.5V 40MHz PLCC-32(11.43x13.97) FIFOs Memory
Fiche TechniqueInfineon/CYPRESS CY7C4201-25JC
Pièces alternatives4
Garantie sur chaque commande
100% Authentique · Retour ou échange sous 30 Jours

Spécifications du Produit

Tout
TypeDescription
CatégorieIntegrated Circuits (ICs)/Logic/FIFOs Memory
FabricantInfineon/CYPRESS
Condit.PLCC-32(11.43x13.97)
Access Time15ns
Memory Size512x9
Current - Supply(Max)35mA
Voltage - Supply4.5V~5.5V
FeaturesOutput enable
Clock Frequency40MHz
Operating Temperature0℃~+70℃
FunctionAsynchronous
Bus DirectionalUnidirectional
Programmable Flags SupportNo

Description

Traduction par IA

The CY7C42X1 is a high-speed, low-power FIFO memory featuring a clocked read/write interface with a 9-bit data width, pin-compatible with the IDT722X1. Programmable features include almost-full/almost-empty flags. These FIFOs address a wide range of data buffering requirements, including high-speed data acquisition, multiprocessor interfaces, and communications buffering. Input and output ports are controlled by independent clocks and enable signals; read and write clocks can be tied together for single-clock operation or run independently for asynchronous read/write applications, with clock frequencies up to 100 MHz. Depth expansion is supported through one enable input for system control and another enable driven by expansion logic to direct data flow. The family provides four status pins: Empty, Full, Almost Empty, and Almost Full. The almost-empty/almost-full flags are programmable with single-word granularity, with default offsets of Empty-7 and Full-7. All configurations are fabricated using an advanced 0.65μm N-well CMOS process, with input ESD protection greater than 2001V, and latch-up prevention achieved through the use of guard rings.

Caractéristiques

Traduction par IA
  • High-speed, low-power FIFO memory
  • Available in multiple configurations: 64×9 (CY7C4421), 256×9 (CY7C4201), 512×9 (CY7C4211), 1K×9 (CY7C4221), 2K×9 (CY7C4231), 4K×9 (CY7C4241), 8K×9 (CY7C4251)
  • High-speed 100 MHz operation (read/write cycle time: 10 ns)
  • Low power consumption (ICC = 35 mA)
  • Fully asynchronous with simultaneous read/write operation
  • Empty, full, programmable almost-empty, and almost-full status flags
  • TTL-compatible
  • Width-expandable
  • Output enable (OE) pin
  • Separate read and write enable pins
  • Center power and ground pins for reduced noise
  • Width expansion capability
  • Space-saving 7 mm×7 mm 32-pin TQFP package
  • Pin-compatible and functionally equivalent to IDT72421, 72201, 72211, 72221, 72231, and 72241
  • Available in lead-free package

Applications

Traduction par IA
  • High-speed data acquisition
  • Multi-processor interface
  • Communication buffering