LCSC Electronics logoLCSC Electronics svg logo
Iniciar sesión
USD

ADI AD8031ARTZ-REEL7

Fabricante
N.º de pieza fab.
AD8031ARTZ-REEL7
Nº LCSC
C207435
Emb.
SOT-23-5
Número de Cliente
Atrib. clave
Rail-to-Rail I/O Amplifiers
Hoja de DatosADI AD8031ARTZ-REEL7
Cumplimiento RoHS1 documentos disponibles
Piezas alternativas5
Garantía en cada pedido
100% Auténtico · Devolución o Reemplazo en 30 Días

Especificaciones del Producto

Todo
TipoDescripción
CategoríaIntegrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps
FabricanteADI
Emb.SOT-23-5
Output Current15mA
Number of Channels1
Vos - Input Offset Voltage1.5mV
Slew Rate32V/us
Input Offset Current(Ios)250nA
Operating Temperature-40℃~+85℃
Common Mode Rejection Ratio(CMRR)70dB
Ib - Input Bias Current450nA
Input Offset Voltage Drift(Vos TC)1.6uV/℃
Quiescent Current800uA
Gain Bandwidth Product80MHz
Features-
Input Voltage Noise Density15nV/√Hz@1kHz
Dual Supply-6V~6V
Rail to RailRail-to-Rail Input, Rail-to-Rail Output
Single Supply2.7V~12V

Descripción

Traducción por IA

The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a single 5 V supply. These features increase the operation time of high speed, battery-powered systems without compromising dynamic performance. The products have true single-supply capability with rail-to-rail input and output characteristics and are specified for +2.7 V, +5 V, and ±5 V supplies. The input voltage range can extend to 500 mV beyond each rail. The output voltage swings to within 20 mV of each rail providing the maximum output dynamic range. The AD8031/AD8032 also offer excellent signal quality for only 800 μA of supply current per amplifier; THD is −62 dBc with a 2 V p-p, 1 MHz output signal, and -86 dBc for a 100 kHz, 4.6 V p-p signal on +5 V supply. The low distortion and fast settling time make them ideal as buffers to single-supply ADCs.

Características

Traducción por IA
  • Low power
  • Supply current 800 μA/amplifier
  • Fully specified at +2.7 V, +5 V, and ±5 V supplies
  • High speed and fast settling on 5 V
  • 80 MHz, -3 dB bandwidth (G = +1)
  • 30 V/μs slew rate
  • 125 ns settling time to 0.7%
  • Rail-to-rail input and output
  • No phase reversal with input 0.5 V beyond supplies
  • Input CMVR extends beyond rails by 200 mV
  • Output swing to within 20 mV of either rail
  • Low distortion
  • −62 dB @ 1 MHz, VO = 2 V p-p
  • −86 dB @ 100 kHz, V0 = 4.6 V p-p
  • Output current: 15 mA
  • High grade option: VOS (maximum) = 1.5 mV

Aplicaciones

Traducción por IA
  • High speed, battery-operated systems
  • High component density systems
  • Portable test instruments
  • A/D buffers
  • Active filters
  • High speed, set-and-demand amplifiers