LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
Carrello
MICROCHIP dsPIC33FJ64MC506A-I/MR product image
Immagini a scopo illustrativo

MICROCHIP dsPIC33FJ64MC506A-I/MR

Produttore
MICROCHIP
Cod. Prod.
dsPIC33FJ64MC506A-I/MR
Cod. LCSC
C642874
Imballo
QFN-64-EP(9x9)
Numero Cliente
Attr. chiave
160MHz QFN-64-EP(9x9) Microcontrollers RoHS
Scheda TecnicaMICROCHIP dsPIC33FJ64MC506A-I/MR
Conformità RoHS2 documenti disponibili
Garanzia su ogni ordine
100% Autentico · Reso o Sostituzione entro 30 Giorni
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.(Solo per riferimento)Importo totale
1+$ 16.7266$ 16.73
200+$ 6.4734$ 1294.68
500+$ 6.2465$ 3123.25
1,000+$ 6.1338$ 6133.80
Package Standard40/Full Tube
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Embedded/Microcontrollers
ProduttoreMICROCHIP
ImballoQFN-64-EP(9x9)
Operating Temperature-40℃~+85℃
Clock Rate160MHz
Aiuto & FeedbackMostra prodotti simili (0) >

Caratteristiche

Traduzione AI
  • Code-efficient (C and Assembly) architecture
  • Two 40-bit wide accumulators
  • Single-cycle (MAC/MPY) with dual data fetch
  • Single-cycle mixed-sign MUL plus hardware divide
  • ±2% internal oscillator
  • Programmable PLLs and oscillator clock sources
  • Fail-Safe Clock Monitor (FSCM)
  • Independent Watchdog Timer (WDT)
  • Fast wake-up and start-up
  • Low-power management modes (Sleep, Idle, Doze)
  • Integrated Power-on Reset and Brown-out Reset
  • 1.35 mA/MHz dynamic current (typical)
  • 55 μA IPD current (typical)
  • Up to four PWM generators with eight outputs
  • Dead Time for rising and falling edges
  • 12.5 ns PWM resolution
  • PWM support for Motor Control: BLDC, PMSM, ACIM, and SRM
  • Programmable Fault inputs
  • Flexible trigger for ADC conversions and configurations
  • Two ADC modules: Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H; 18 analog inputs on 64-pin devices and up to 32 analog inputs on 100-pin devices; Flexible and independent ADC trigger sources
  • Up to nine 16-bit timers/counters. Can pair up to make four 32-bit timers. Eight Output Compare modules configurable as timers/counters
  • Eight Input Capture modules
  • Two UART modules (10 Mbps) - With support for LIN 2.0 protocols and IrDA
  • Two 4-wire SPI modules (15 Mbps)
  • Up to two I²C modules (up to 1 Mbaud) with SMBus support
  • Up to two Enhanced CAN (ECAN) modules (1 Mbaud) with 2.0B support
  • Quadrature Encoder Interface (QEI) module
  • Data Converter Interface (DCI) module with I²S codec support
  • Sink/Source up to 10 mA (pin specific) for standard VOH/VOL, up to 16 mA (pin specific) for nonstandard VOH1
  • 5V-tolerant pins
  • Selectable open drain, pull-ups, and pull-downs
  • Up to 5 mA overvoltage clamp current
  • External interrupts on all I/O pins
  • AEC-Q100 REVG (Grade 1 -40°C to +125°C)
  • AEC-Q100 REVG (Grade 0 -40°C to +150°C)
  • Class B Safety Library, IEC 60730
  • In-circuit and in-application programming
  • Two program and two complex data breakpoints
  • IEEE 1149.2-compatible (JTAG) boundary scan
  • Trace and run-time watch

Applicazioni

Traduzione AI
  • Brushless DC motors
  • Single and 3-phase induction motors
  • Switched reluctance motors
  • Uninterrupted Power Supply (UPS)
  • Inverters
  • Switched mode power supplies
  • Power factor correction
  • Controlling the power management module in servers
  • Telecommunication equipment
  • Other industrial equipment