LCSC Electronics logoLCSC Electronics svg logo
Entrar
USD
MICROCHIP MCP73832T-2ACI/OT product image
  • MCP73832T-2ACI/OT thumbnail 1
  • MCP73832T-2ACI/OT thumbnail 2
  • MCP73832T-2ACI/OT thumbnail 3
  • Pinagem
  • Footprint
Imagens ilustrativas

MICROCHIP MCP73832T-2ACI/OT

Fabricante
Cód. da peça
MCP73832T-2ACI/OT
Nº LCSC
C38066
Emb.
SOT-23-5
Número do Cliente
Atrib. princ.
Miniature Single-Cell, Fully Integrated Li-Ion, Li-Polymer Charge Management Controllers
Folha de DadosMICROCHIP MCP73832T-2ACI/OT
Conformidade RoHS2 documentos disponíveis
Peças alternativas5
Garantia em cada pedido
100% Autêntico · Devolução ou Substituição em 30 Dias

Especificações do Produto

Tudo
TipoDescrição
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Battery Chargers
FabricanteMICROCHIP
Emb.SOT-23-5
End-Off Voltage-
Voltage - Supply3.75V~6V
Quiescent Current1uA
Operating Temperature-40℃~+85℃
Number of Cells1
Interface-
FeaturesConstant current charging;Constant voltage charging;Trickle charging;Automatic recharge;Charge termination;Programmable charging current;Reverse current blocking;Under-voltage lockout
Battery Temperature DetectionNot supported
0V Battery Charge-
Type of BatteryLithium Battery
The Chip TypeCharging IC
Balance Current-
Charge Current - Max550mA
Charging Saturation Voltage4.2V

Descrição

Tradução por IA

The MCP73831/2 devices are highly advanced linear charge management controllers for use in space-limited, cost-sensitive applications. The MCP73831/2 are available in an 8-Lead, 2 mm×3 mm DFN package or a 5-Lead, SOT-23 package. Along with their small physical size, the low number of external components required makes the MCP73831/2 ideally suited for portable applications. For applications charging from a USB port, the MCP73831/2 adhere to all the specifications governing the USB power bus. The MCP73831/2 employ a constant-current/constant-voltage charge algorithm with selectable preconditioning and charge termination. The constant voltage regulation is fixed with four available options: 4.20V, 4.35V, 4.40V or 4.50V, to accommodate new, emerging battery charging requirements. The constant current value is set with one external resistor. The MCP73831/2 devices limit the charge current based on die temperature during high power or high ambient conditions. This thermal regulation optimizes the charge cycle time while maintaining device reliability. Several options are available for the preconditioning threshold, preconditioning current value, charge termination value and automatic recharge threshold. The preconditioning value and charge termination value are set as a ratio or percentage of the programmed constant current value. Preconditioning can be disabled. The MCP73831/2 devices are fully specified over the ambient temperature range of -40°C to +85°C

Recursos

Tradução por IA
  • Linear Charge Management Controller:
    • Integrated Pass Transistor
    • Integrated Current Sense
    • Reverse Discharge Protection
  • High Accuracy Preset Voltage Regulation: ± 0.75%
  • Four Voltage Regulation Options: 4.20V, 4.35V, 4.40V, 4.50V
  • Programmable Charge Current: 15 mA to 500 mA
  • Selectable Preconditioning: 10%, 20%, 40%, or Disable
  • Selectable End-of-Charge Control: 5%, 7.5%, 10%, or 20%
  • Charge Status Output:
    • Tri-State Output - MCP73831
    • Open-Drain Output - MCP73832
  • Automatic Power-Down
  • Thermal Regulation
  • Temperature Range: -40°C to +85°C
  • Packaging:
    • 8-Lead, 2 mm×3 mm DFN
    • 5-Lead, SOT-23

Aplicações

Tradução por IA
  • Lithium-Ion/Lithium-Polymer Battery Chargers
  • Personal Data Assistants
  • Cellular Telephones
  • Digital Cameras
  • MP3 Players
  • Bluetooth Headsets
  • USB Chargers