LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
Carrello
Bel Fuse DP8140G-T050 product image
Immagini a scopo illustrativo

Bel Fuse DP8140G-T050

Produttore
Bel Fuse
Cod. Prod.
DP8140G-T050
Cod. LCSC
C6935046
Imballo
SIP,45.7x14mm
Numero Cliente
Attr. chiave
700mV~5.5V 8V~14V SIP,45.7x14mm DC DC Converters RoHS
Scheda TecnicaBel Fuse DP8140G-T050
Garanzia su ogni ordine
100% Autentico · Reso o Sostituzione entro 30 Giorni
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.(Solo per riferimento)Importo totale
1+$ 107.6785$ 107.68
200+$ 42.9647$ 8592.94
500+$ 41.5296$ 20764.80
1,000+$ 40.8204$ 40820.40
Package Standard50/Full Tray
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaPower Supplies/Power Suppliers - Board Mount/DC DC Converters
ProduttoreBel Fuse
ImballoSIP,45.7x14mm
Output Voltage700mV~5.5V
Ripple Noise10mVp-p;20mVp-p;40mVp-p;18mVp-p;35mVp-p;50mVp-p
Operating Temperature-40℃~+85℃
Type-
Quiescent Supply Current-
Voltage - Supply8V~14V
Capacitive Load(Max)-
Number of Outputs1
Iout40A
Height-
Frequency - Switching500kHz
Isolation Voltage(Vrms)-
Conversion Efficiency93%
Output Power-
FeaturesDigital control architecture;Dynamic voltage scaling;Power-on timing control;Programmable soft start;Under Voltage Protection;Short Circuit Protection;Overvoltage protection;Over Current Protection;Over-temperature protection
Length-
Width-
Aiuto & FeedbackMostra prodotti simili (0) >

Descrizione

Traduzione AI

An intelligent, fully programmable step-down point-of-load DC-DC converter integrating digital power conversion and intelligent power management. The dPOL is used in conjunction with DM73xx Series Digital Power Manager (DPM), and completely eliminates the need for external components for output voltage setting, sequencing, tracking, protection, monitoring, error amplifier compensation and reporting. All performance parameters of the DP8140G are programmable and managed through Digital Power Manager via the industry-standard I2C communication bus and can be changed by a user at any time during product development and operation. Telemetry data is available in real time and can be accessed over the I2C bus.

Caratteristiche

Traduzione AI
  • Input voltage range: 8 - 14 V
  • Programmable key features
  • A voltage out range of 0.7 - 3.65 V at 0 to 40 A
  • Efficiency greater than 93% with a built in heat sink
  • Two phase 500 KHz switching for low ripple noise
  • Flexible Fault Response features
  • Multiple turn-on/off slew rates and delays
  • Digital Filter Compensation Synchronous operation with other supplies
  • Real time performance monitoring
  • GUI based configuration for short development time
  • Low height of 1.1” suitable for 1U high enclosures
  • Approved to the latest edition and amendment of ITE Safety standards, UL/CSA 60950-1 and IEC 60950-1