LCSC Electronics logoLCSC Electronics svg logo
Iniciar sesión
USD

Broadcom HCPL-263L-500E

Fabricante
N.º de pieza fab.
HCPL-263L-500E
Nº LCSC
C692033
Emb.
SOP
Número de Cliente
Atrib. clave
50mA 5V 1.5V 2.7V~3.6V DC SOP Logic Output Optoisolators RoHS
Hoja de DatosBroadcom HCPL-263L-500E
Cumplimiento RoHS1 documentos disponibles
Garantía en cada pedido
100% Auténtico · Devolución o Reemplazo en 30 Días

Especificaciones del Producto

Todo
TipoDescripción
CategoríaIsolators/Optocouplers, Optoisolators/Logic Output Optoisolators
FabricanteBroadcom
Emb.SOP
Load Voltage-
Power Dissipation-
Output Current50mA
Low Level Delay Time90ns
High Level Delay Time75ns
FeaturesOutput enable control;Open-collector output
Reverse Voltage5V
Current transfer ratio-
Voltage - Forward(Vf)1.5V
Voltage - Supply2.7V~3.6V
Forward Current(If)15mA
Operating Temperature-40℃~+85℃
CMTI(kV/us)25kV/us
Number of Channels2
Input threshold current5mA
Isolation Voltage(Vrms)3.75kV
Input TypeDC

Descripción

Traducción por IA

The HCPL-260L/060L/263L/063L are optically coupled gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed. The output of the detector IC is an open collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 15 kV/μs at 3.3 V.

This unique design provides maximum AC and DC circuit isolation while achieving LVTTL/LVCMOS compatibility. The optocoupler AC and DC operational parameters are guaranteed from -40 °C to +85 °C allowing troublefree system performance.

These optocouplers are suitable for high speed logic interfacing, input/output buffering, as line receivers in environments that conventional line receivers cannot tolerate and are recommended for use in extremely high ground or induced noise environments.

Características

Traducción por IA
  • 3.3V/5V Dual Supply Voltages
  • Low power consumption
  • 15 kV/μs minimum Common Mode Rejection (CMR) at VCM = 1000 V
  • High speed: 15 MBd typical
  • LVTTL/LVCMOS compatible
  • Low input current capability: 5 mA
  • Guaranteed AC and DC performance over temperature: -40 °C to +85 °C
  • Available in 8-pin DIP, SOIC-8
  • Strobable output (single channel products only)
  • Safety approvals: UL, CSA, IEC/EN/DIN EN 60747-5-5

Aplicaciones

Traducción por IA
  • Isolated line receiver
  • Computer-peripheral interfaces
  • Microprocessor system interfaces Digital isolation for A/D, D/A conversion
  • Switching power supply
  • Instrument input/output isolation
  • Ground loop elimination
  • Pulse transformer replacement Field buses