LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
ADI LTC3214EDD#TRPBF product image
Abbildung ähnlich

ADI LTC3214EDD#TRPBF

Hersteller
Herst.-Teilenr.
LTC3214EDD#TRPBF
LCSC-Nr.
C684297
Verp.
DFN-10-EP(3x3)
Kundennummer
Hauptmerkm.
900kHz 1 DC-DC 500mA 2.9V~4.5V DFN-10-EP(3x3) LED Drivers RoHS
DatenblattADI LTC3214EDD#TRPBF
RoHS-Konformität1 Dokumente verfügbar
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 3.1626$ 3.16
200+$ 1.224$ 244.80
500+$ 1.1808$ 590.40
1,000+$ 1.1607$ 1160.70
Standardgehäuse2500/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/LED Drivers
HerstellerADI
Verp.DFN-10-EP(3x3)
Frequency - Switching900kHz
Dimming-
Voltage - Input(AC)-
Number of Channels1
TypeDC-DC
Switch tube (built-in/external)-
Output Voltage-
Operating Temperature-40℃~+85℃
Output Current500mA
FeaturesBuilt-in soft-start;Short Circuit Protection;LED open-circuit protection;Over-Temperature Protection (OTP)
TopologyCharge Pump
Constant Current Accuracy-
Voltage - Input(DC)2.9V~4.5V

Beschreibung

KI-Übersetzung

The LTC3214 is a low noise, high current charge pump DC/DC converter capable of driving high current LEDs at up to 500mA from a 2.9V to 4.5V input. Low external parts count (two flying capacitors, one programming resistor and two bypass capacitors at VIN and CPO) make the LTC3214 ideally suited for small, battery-powered applications. Built-in soft-start circuitry prevents excessive inrush current during start-up. High switching frequency enables the use of small external capacitors. Output current level is programmed by an external resistor. LED current is regulated using an internal 110mΩ sense resistor. Automatic mode switching optimizes efficiency by monitoring the voltage across the charge pump and switching modes only when dropout is detected. The part is available in a low profile 3mm×3mm 10-lead DFN package.

Merkmale

KI-Übersetzung
  • Low Noise Constant Frequency Operation
  • High Efficiency: Up to 94%
  • Multi-Mode Operation: 1x, 1.5x or 2x Boost Modes
  • Automatic Mode Switching
  • High Output Current: Up to 500mA
  • Tiny Application Circuit (3mm×3mm DFN Package, All Components <1mm High)
  • Automatic Soft-Start
  • Output Disconnect
  • Open, Shorted LED Protection
  • No Inductors
  • Internal 110mΩ LED Current Sense Resistor
  • 3mm×3mm 10-Lead DFN Package

Anwendungen

KI-Übersetzung
  • LED Torch/Camera Light Supply for Cell Phones, PDAs and Digital Cameras
  • General Lighting and/or Flash/Strobe Applications