LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
ADI LTC2357CLX-18#PBF product image
Abbildung ähnlich

ADI LTC2357CLX-18#PBF

Hersteller
Herst.-Teilenr.
LTC2357CLX-18#PBF
LCSC-Nr.
C680234
Verp.
LQFP-48(7x7)
Kundennummer
Hauptmerkm.
SPI 7.5V~38V LQFP-48(7x7) Analog to Digital Converters (ADC) RoHS
DatenblattADI LTC2357CLX-18#PBF
RoHS-Konformität1 Dokumente verfügbar
Alternativteile2
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch
Vorrätig: 1
1 Ab Lager, sofort versandfertig
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-PreisGesamtbetrag
1+$ 74.2719$ 74.27
10+$ 71.7228$ 717.23
Standardgehäuse250/Full Tray
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Data Acquisition/Analog to Digital Converters (ADC)
HerstellerADI
Verp.LQFP-48(7x7)
Operating Temperature0℃~+70℃
Voltage ReferenceBuilt-in
Clock/OscillatorBuilt-in
FeaturesSimultaneous sampling;Input buffer
InterfaceSPI
Quiescent Current (Iq)14.3mA
Resolution(Bits)350kHz;18
S/N Ratio96.4dB
Voltage - Supply7.5V~38V
Number of Channels4
ADC architectureSAR
Integral non - linearity3.5LSB

Beschreibung

KI-Übersetzung

The LTC2357 - 18 is an 18-bit, low noise 4-channel simultaneous sampling successive approximation register (SAR) ADC with buffered differential, wide common mode range picoamp inputs. Operating from a 5V low voltage supply, flexible high voltage supplies, and using the internal reference and buffer, each channel of this SoftSpan™ ADC can be independently configured on a conversion-by-conversion basis to accept ±10.24V, 0V to 10.24V, ±5.12V, or 0V to 5.12V signals. Individual channels may also be disabled to increase throughput on the remaining channels. The integrated picoamp-input analog buffers, wide input common mode range and 128dB CMRR of the LTC2357 - 18 allow the ADC to directly digitize a variety of signals using minimal board space and power. This input signal flexibility, combined with ±3.5 LSB INL, no missing codes at 18 bits, and 96.4dB SNR, makes the LTC2357 - 18 an ideal choice for many high voltage applications requiring wide dynamic range. The LTC2357 - 18 supports pin-selectable SPI CMOS (1.8V to 5V) and LVDS serial interfaces. Between one and four lanes of data output may be employed in CMOS mode, allowing the user to optimize bus width and throughput.

Merkmale

KI-Übersetzung
  • Simultaneous Sampling of 4 Buffered Channels
  • 350ksps per Channel Throughput
  • 500pA/12nA Max Input Leakage at 85°C/125°C
  • ±3.5 LSB INL (Maximum, ±10.24V Range)
  • Guaranteed 18 - Bit, No Missing Codes
  • Differential, Wide Common Mode Range Inputs
  • Per - Channel SoftSpan Input Ranges: ±10.24V, 0V to 10.24V, ±5.12V, 0V to 5.12V, ±12.5V, 0V to 12.5V, ±6.25V, 0V to 6.25V
  • 96.4dB Single - Conversion SNR (Typical)
  • −110dB THD (Typical) at fIN = 2kHz
  • 128dB CMRR (Typical) at fIN = 200Hz
  • Rail - to - Rail Input Overdrive Tolerance
  • Integrated Reference and Buffer (4.096V)
  • SPI CMOS (1.8V to 5V) and LVDS Serial I/O
  • Internal Conversion Clock, No Cycle Latency
  • 175mW Power Dissipation (44mW/Ch Typical)
  • 48 - Lead (7mm x 7mm) LQFP Package

Anwendungen

KI-Übersetzung
  • Programmable Logic Controllers
  • Industrial Process Control
  • Power Line Monitoring
  • Test and Measurement

Alternativteile

MPNHerstellerAlternativtypVerpackungVerfügbarkeitStückpreis
LTC2357HLX-18#PBFADIÄhnlicheLQFP-48(7x7)0$ 51.0148
LTC2357ILX-18#PBFADIÄhnlicheLQFP-48(7x7)0$ 42.43