LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Warenkorb
ADI LTC2067HDD#PBF product image
Abbildung ähnlich

ADI LTC2067HDD#PBF

Hersteller
ADI
Herst.-Teilenr.
LTC2067HDD#PBF
LCSC-Nr.
C679313
Verp.
DFN-10-EP(3x3)
Kundennummer
Hauptmerkm.
51mA 2 1uV 0.0175V/us 134dB 5pA 10uA 100kHz Rail-to-Rail Input, Rail-to-Rail Output DFN-10-EP(3x3) Instrumentation, Op Amps, Buffer Amps RoHS
DatenblattADI LTC2067HDD#PBF
RoHS-Konformität1 Dokumente verfügbar
Alternativteile1
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 3.5948$ 3.59
200+$ 1.3907$ 278.14
500+$ 1.3429$ 671.45
1,000+$ 1.3182$ 1318.20
Standardgehäuse121/Full Tube
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps
HerstellerADI
Verp.DFN-10-EP(3x3)
Output Current51mA
Number of Channels2
Vos - Input Offset Voltage1uV
Slew Rate0.0175V/us
Input Offset Current(Ios)35pA
Operating Temperature-40℃~+125℃
Common Mode Rejection Ratio(CMRR)134dB
Ib - Input Bias Current5pA
Input Offset Voltage Drift(Vos TC)40nV/℃
Quiescent Current10uA
Gain Bandwidth Product100kHz
FeaturesEMI filtering/RF suppression;Enable/shutdown function;Zero drift / auto-zero
Input Voltage Noise Density-
Dual Supply-
Rail to RailRail-to-Rail Input, Rail-to-Rail Output
Single Supply1.7V~5.25V
Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >

Beschreibung

KI-Übersetzung

The LTC2066, /LTC2067 are single and dual low power, zero-drift, 100kHz amplifiers. The LTC2066/LTC2067 enable high resolution measurement at extremely low power levels. Typical supply current is 7.5μA per amplifier with a maximum of 10μA. The available shutdown mode has been optimized to minimize power consumption in duty-cycled applications and features low charge loss during powerup, reducing total system power. The LTC2066/LTC2067’s self-calibrating circuitry results in very low input offset (5µV max) and offset drift (0.02μV/°C). The maximum input bias current is only 35pA and does not exceed 150pA over the full specified temperature range. The extremely low input bias current of the LTC2066/LTC2067 allows the use of high value power-saving resistors in the feedback network. With its ultralow quiescent current and outstanding precision, the LTC2066/LTC2067 can serve as a signal chain building block in portable, energy harvesting and wireless sensor applications. The LTC2066 is available in 6-lead SC70 and 5-lead TSOT23 packages. The LTC2067 is available in 8-lead MSOP and 10-lead DFN packages. These devices are fully specified over the -40°C to 85°C and -40°C to 125°C temperature ranges.

Merkmale

KI-Übersetzung
  • Low Supply Current: 10μA Maximum (per Amplifier)
  • Offset Voltage: 5μV Maximum
  • Offset Voltage Drift: 0.02μV/°C Maximum
  • Input Bias Current: 5pA Typical, 50pA Maximum, -40°C to 85°C; 150pA Maximum, -40°C to 125°C
  • Integrated EMI Filter (90dB Rejection at 1.8GHz)
  • Shutdown Current: 170nA Maximum (per Amplifier)
  • Rail-to-Rail Input and Output
  • 1.7V to 5.25V Operating Supply Range
  • AVOL: 140dB Typical
  • Low-Charge Power-Up for Duty Cycled Applications
  • Specified Temperature Ranges: -40°C to 85°C, -40°C to 125°C
  • SC70, TSOT-23, MS8 and DFN Packages

Anwendungen

KI-Übersetzung
  • Signal Conditioning in Wireless Mesh Networks
  • Portable Instrumentation Systems
  • Low-Power Sensor Conditioning
  • Gas Detection
  • Temperature Measurement
  • Medical Instrumentation
  • Energy Harvesting Applications
  • Low Power Current Sensing
  • Precision Micropower Low Side Current Sense

Alternativteile

MPNHerstellerAlternativtypVerpackungVerfügbarkeitStückpreis
LTC2067IDD#PBFADIÄhnlicheDFN-10-EP(3x3)0$ 5.5756
Alle alternativen Bauteile anzeigen und vergleichen.