LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Warenkorb
ADI LTC6104HMS8#TRPBF product image
Abbildung ähnlich

ADI LTC6104HMS8#TRPBF

Hersteller
ADI
Herst.-Teilenr.
LTC6104HMS8#TRPBF
LCSC-Nr.
C678657
Verp.
MSOP-8
Kundennummer
Hauptmerkm.
1mA 1 520uA MSOP-8 Instrumentation, Op Amps, Buffer Amps RoHS
DatenblattADI LTC6104HMS8#TRPBF
RoHS-Konformität1 Dokumente verfügbar
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 3.3525$ 3.35
200+$ 1.2981$ 259.62
500+$ 1.2518$ 625.90
1,000+$ 1.2302$ 1230.20
Standardgehäuse2500/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps
HerstellerADI
Verp.MSOP-8
Output Current1mA
Number of Channels1
Vcm - Common Mode Voltage-
Vos - Input Offset Voltage-
Slew Rate-
Operating Temperature-40℃~+125℃
Ib - Input Bias Current-
Common Mode Rejection Ratio(CMRR)-
Input Offset Voltage Drift(Vos TC)1.5uV/℃
-3dB Bandwidth140kHz;200kHz
Quiescent Current520uA
Gain-
FeaturesHigh-side detection;Bidirectional detection;External shunt;Analog output interface
Input Voltage Noise Density-
Differential Voltage-
Dual Supply-
Single Supply-
Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >

Beschreibung

KI-Übersetzung

The LTC6104 is a versatile, high voltage, high side, bidirectional current sense amplifier. Design flexibility is provided by the excellent device characteristics: ±450μV maximum offset and only 520μA of current consumption (typical at 12V). The LTC6104 operates on supplies from 4V to 60V. The LTC6104 monitors bi-directional current via the voltage across an external sense resistor (shunt resistor). This sense voltage is then translated into a ground referenced signal. Gain is set with three external resistors and can be separately configured for both directions. Low DC offset allows the use of a small shunt resistor and large gain-setting resistors. As a result, power loss in the shunt is minimal. The wide operating supply range and high accuracy make the LTC6104 ideal for a wide variety of automotive, industrial and power management applications. A maximum input sense voltage of 500mV allows a wide range of currents to be monitored. The fast response makes the LTC6104 the perfect choice for load current warnings and shutoff protection control. With very low supply current, the LTC6104 is suitable for power sensitive applications. The LTC6104 is available in an 8-lead MSOP package.

Merkmale

KI-Übersetzung
  • Wide Supply Range: 4V to 60V with 70V Absolute Maximum
  • Low Offset Voltage: ±450μV Maximum
  • Fast Response: 1μs Response Time
  • Gain Configurable with External Resistors; Each Direction is Gain Configurable
  • Low Input Bias Current: 170nA Maximum
  • PSRR: 110dB Minimum
  • Output Current: ±1mA Maximum
  • Low Supply Current: 520μA, VS = 12V
  • Specified for -40°C to 125°C Temperature Range
  • Available in an 8-Lead MSOP Package

Anwendungen

KI-Übersetzung
  • Current Shunt Measurement
  • Battery Monitoring
  • Remote Sensing
  • Power Management