LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
Carrello
ADI ADP222ACPZ-1528-R7 product image
Immagini a scopo illustrativo

ADI ADP222ACPZ-1528-R7

Produttore
ADI
Cod. Prod.
ADP222ACPZ-1528-R7
Cod. LCSC
C659129
Imballo
LFCSP-8(2x2)
Numero Cliente
Attr. chiave
Positive Fixed LFCSP-8(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators RoHS
Scheda TecnicaADI ADP222ACPZ-1528-R7
Conformità RoHS1 documenti disponibili
Garanzia su ogni ordine
100% Autentico · Reso o Sostituzione entro 30 Giorni
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.(Solo per riferimento)Importo totale
1+$ 1.0203$ 1.02
200+$ 0.3952$ 79.04
500+$ 0.3813$ 190.65
1,000+$ 0.3751$ 375.10
Package Standard3000/Full Reel
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - Linear, Low Drop Out (LDO) Regulators
ProduttoreADI
ImballoLFCSP-8(2x2)
Output Voltage1.5V;2.8V
Number of Outputs2
Operating Temperature-40℃~+125℃
Supply Current (Iq)-
Output ConfigurationPositive
Operating Voltage5.5V
Output Current300mA
FeaturesEnable control;Built-in soft-start;Over Current Protection;Thermal shutdown;Input under-voltage protection
Output TypeFixed
Aiuto & FeedbackMostra prodotti simili (0) >

Descrizione

Traduzione AI

The ADP222/ADP224 offer fixed output voltage options ranging from 0.8 V to 3.3 V. The adjustable output voltage regulators ADP223/ADP225 provide an output voltage range of 0.5 V to 5.0 V. The low quiescent current, low dropout, and wide input range of the ADP222/ADP223/ADP224/ADP225 extend battery life in portable devices. These devices maintain greater than 60 dB power supply rejection at operating frequencies up to 100 kHz while requiring very low headroom voltage. Compared to competing LDO products, the ADP222/ADP223/ADP224/ADP225 exhibit significantly lower noise. The ADP223/ADP225 are 300 mA adjustable dual-output voltage regulators, while the ADP222/ADP224 are fixed dual-output voltage regulators. These devices combine high PSRR, low noise, low quiescent current, and low dropout, making them ideal for wireless applications with stringent performance and board space requirements. No noise bypass capacitor is required. These devices also feature overcurrent and thermal protection circuitry to prevent damage under adverse conditions. The ADP224 and ADP225 are functionally identical to the ADP222 and ADP223, respectively, except that the ADP224 and ADP225 add a quick output discharge (QOD) feature. The ADP222/ADP223/ADP224/ADP225 are offered in an 8-lead, 2 mm×2 mm LFCSP package and are stable with small 0.1 μF, ±30% ceramic output capacitors, enabling portable power solutions in minimal board space.

Caratteristiche

Traduzione AI
  • Input voltage range: 2.5 V to 5.5 V
  • 8-lead 2 mm × 2 mm small LFCSP package
  • Initial accuracy: ±1%
  • High PSRR: 70 dB (10 kHz), 60 dB (100 kHz), 40 dB (1 MHz)
  • Low noise: 27 μV rms (Vout = 1.2 V), 50 μV rms (Vout = 2.8 V)
  • Excellent transient response performance
  • Low dropout: 170 mV (300 mA load)
  • Typical ground current: 65 μA (no load, both LDOs enabled)
  • Fixed output voltage: 0.8 V to 3.3 V (ADP222/ADP224)
  • Adjustable output voltage range: 0.5 V to 5.0 V (ADP223/ADP225)
  • Quick output discharge (QOD) — ADP224/ADP225
  • Overcurrent and thermal protection

Applicazioni

Traduzione AI
  • Portable and battery-powered devices
  • Portable medical equipment
  • Post DC-DC regulation
  • Point-of-sale terminals
  • Credit card readers
  • Automatic meter reading devices
  • Wireless network equipment