Nisshinbo Micro Devices Inc. RP101N201B-TR-FE

The RP101x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier, resistor-net for voltage setting, a current limit circuit, and a chip enable circuit. These ICs perform with low dropout voltage and a chip enable function. The line transient response and load transient response of the RP101x Series are excellent, thus these ICs are very suitable for the power supply for hand-held communication equipment. The output voltage of these ICs is fixed with high accuracy. Since the packages for these ICs are SOT-23-5 and DFN(PL)1612-4 (t=0.6mm type) or DFN(PL)1612-4B (t=0.4mm type), therefore high density mounting of the ICs on boards is possible.

• Supply Current ... Typ. 18μA
• Standby Current ... Typ. 0.1μA
• Dropout Voltage ... Typ. 0.13V (IOUT = 150mA, VOUT = 2.8V)
• Ripple Rejection ... Typ. 75dB (f = 1kHz)
• Temperature-Drift Coefficient of Output Voltage ... Typ. ±30ppm/°C
• Line Regulation ... Typ. 0.02%/V
• Output Voltage Accuracy ... ±0.6%
• Packages ... DFN(PL)1612-4, DFN(PL)1612-4B, SOT-23-5
• Input Voltage Range ... 1.7V to 5.25V
• Output Voltage Range ... 1.2V to 3.3V (0.1V steps)
• Built-in Fold Back Protection Circuit ... Typ. 40mA (Current at short mode)
• Ceramic capacitors are recommended to be used with this IC ... 1.0μF or more

• Power source for portable communication equipment.
• Power source for electrical appliances such as cameras, VCRs and camcorders.
• Power source for battery-powered equipment.
• Power source for home appliances.