Name: ALLEGRO ACS773LCB-100B-SMT-T
Brand: ALLEGRO
SKU: C3684536
Price: 11.0865 USD
Availability: OutOfStock

AEC - Q100 Grade 1 qualified
Typical of 2.5 μs output response time
3.3 V supply operation
Ultra - low power loss: 100 μΩ internal conductor resistance
Reinforced galvanic isolation allows use in economical, high - side current sensing in high - voltage systems
4800 Vrms dielectric strength certified under UL60950 - 1
Industry - leading noise performance with greatly improved bandwidth through proprietary amplifier and filter design techniques
Integrated shield greatly reduces capacitive coupling from current conductor to die due to high dV/dt signals, and prevents offset drift in high - side, high - voltage applications
Greatly improved total output error through digitally programmed and compensated gain and offset over the full operating temperature range
Small package size, with easy mounting capability
Monolithic Hall IC for high reliability
Output voltage proportional to AC or DC currents
Factory - trimmed for accuracy
Extremely stable output offset voltage
The Allegro ACS773 family of current sensor ICs provide economical and precise solutions for AC or DC current sensing, ideal for motor control, load detection and management, power supply and DC - to - DC converter control, and inverter control. The 2.5 μs response time enables overcurrent fault detection in safety - critical applications.
The device consists of a precision, low - offset linear Hall circuit with a copper conduction path located near the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional output voltage is provided by the low - offset, chopper - stabilized BiCMOS Hall IC, which is programmed for accuracy at the factory. Proprietary digital temperature compensation technology greatly improves the IC accuracy and temperature stability.
High - level immunity to current conductor dV/dt and stray electric fields is offered by Allegro proprietary integrated shield technology for low output voltage ripple and low offset drift in high - side, high - voltage applications.
The output of the device increases when an increasing current flows through the primary copper conduction path (from terminal 4 to terminal 5), which is the path used for current sampling. The internal resistance of this conductive path is 100 μΩ typical, providing low power loss.
The thickness of the copper conductor allows survival of the device at high overcurrent conditions. The terminals of the conductive path are electrically isolated from the signal leads (pins 1 through 3). This allows the ACS773 family of sensor ICs to be used in applications requiring electrical isolation without the use of opto - isolators or other costly isolation techniques.
The device is fully calibrated prior to shipment from the factory. The ACS773 family is lead (Pb) free. All leads are plated with 100% matte tin, and there is no Pb inside the package. The heavy gauge leadframe is made of oxygen - free copper.

AEC - Q100 Grade 1 qualified
Typical of 2.5 μs output response time
3.3 V supply operation
Ultra - low power loss: 100 μΩ internal conductor resistance
Reinforced galvanic isolation allows use in economical, high - side current sensing in high - voltage systems
4800 Vrms dielectric strength certified under UL60950 - 1
Industry - leading noise performance with greatly improved bandwidth through proprietary amplifier and filter design techniques
Integrated shield greatly reduces capacitive coupling from current conductor to die due to high dV/dt signals, and prevents offset drift in high - side, high - voltage applications
Greatly improved total output error through digitally programmed and compensated gain and offset over the full operating temperature range
Small package size, with easy mounting capability
Monolithic Hall IC for high reliability
Output voltage proportional to AC or DC currents
Factory - trimmed for accuracy
Extremely stable output offset voltage
The Allegro ACS773 family of current sensor ICs provide economical and precise solutions for AC or DC current sensing, ideal for motor control, load detection and management, power supply and DC - to - DC converter control, and inverter control. The 2.5 μs response time enables overcurrent fault detection in safety - critical applications.
The device consists of a precision, low - offset linear Hall circuit with a copper conduction path located near the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional output voltage is provided by the low - offset, chopper - stabilized BiCMOS Hall IC, which is programmed for accuracy at the factory. Proprietary digital temperature compensation technology greatly improves the IC accuracy and temperature stability.
High - level immunity to current conductor dV/dt and stray electric fields is offered by Allegro proprietary integrated shield technology for low output voltage ripple and low offset drift in high - side, high - voltage applications.
The output of the device increases when an increasing current flows through the primary copper conduction path (from terminal 4 to terminal 5), which is the path used for current sampling. The internal resistance of this conductive path is 100 μΩ typical, providing low power loss.
The thickness of the copper conductor allows survival of the device at high overcurrent conditions. The terminals of the conductive path are electrically isolated from the signal leads (pins 1 through 3). This allows the ACS773 family of sensor ICs to be used in applications requiring electrical isolation without the use of opto - isolators or other costly isolation techniques.
The device is fully calibrated prior to shipment from the factory. The ACS773 family is lead (Pb) free. All leads are plated with 100% matte tin, and there is no Pb inside the package. The heavy gauge leadframe is made of oxygen - free copper.

Producent	ALLEGRO
Nr części prod.	ACS773LCB-100B-SMT-T
Nr LCSC	C3684536
Opak.	CB-5
Numer Klienta
Klucz. cechy	3V~3.6V 100A 13.2mV/A CB-5 Current Sensors RoHS
Karta Katalogowa	ALLEGRO ACS773LCB-100B-SMT-T
Zgodność z RoHS	1 dokumentów dostępnych
Części alternatywne	1

Typ	Opis
Kategoria	Sensors, Transducers/Current Sensors
Producent	ALLEGRO
Opak.	CB-5
Standby Current	-
Voltage - Supply	3V~3.6V
Current Range	100A
Operating Temperature	-40℃~+150℃
Band Width	200kHz
Current Terminal Resistance	0.1mΩ
Features	Overcurrent Protection;Bidirectional detection;Power-on reset
Response Time (tr)	2.5us
Sensitivity	13.2mV/A
Bidirectional Current Detection	Support

Typ	Opis
Kategoria	Sensors, Transducers/Current Sensors
Producent	ALLEGRO
Opak.	CB-5
Standby Current	-
Voltage - Supply	3V~3.6V
Current Range	100A
Operating Temperature	-40℃~+150℃

Typ	Opis
Band Width	200kHz
Current Terminal Resistance	0.1mΩ
Features	Overcurrent Protection;Bidirectional detection;Power-on reset
Response Time (tr)	2.5us
Sensitivity	13.2mV/A
Bidirectional Current Detection	Support

Szt.	Cena jedn.(Tylko do wglądu)	Suma całkowita
1+	$ 11.4314	$ 11.43
10+	$ 11.0865	$ 110.87
Standardowa Obudowa34/Full Tube

ALLEGRO ACS773LCB-100B-SMT-T

Specyfikacje Produktu

Opis

Zastosowania

Specyfikacje Produktu

Opis

Zastosowania

C3684536 Biblioteka EasyEDA

Zgodność & Kody Eksportowe

Części alternatywne

Typ	Szczegóły
RoHS	ROHS3 Compliant
ECCN	EAR99
CNHTS	9030899090
USHTS	9030890100
TARIC	9030890000
CAHTS	9030890090
BRHTS	90308990
INHTS	90308990
MXHTS	9030.89.99