LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD

ST STM8S003F3U6TR

Hersteller
Herst.-Teilenr.
STM8S003F3U6TR
LCSC-Nr.
C35556
Verp.
UFQFPN-20(3x3)
Kundennummer
Hauptmerkm.
16 MHz STM8 8-bit MCU, 8 Kbyte Flash, 128 byte data EEPROM, 10-bit ADC, 3 timers, UART, SPI, I2C
DatenblattST STM8S003F3U6TR
RoHS-Konformität3 Dokumente verfügbar
Alternativteile3
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Embedded/Microcontrollers
HerstellerST
Verp.UFQFPN-20(3x3)
ADC (Bit)10bit
Number of I/O16
Operating Temperature-40℃~+85℃
Voltage - Supply2.95V~5.5V
Program Memory TypeFLASH
EEPROM128Byte
Program Storage Size8KB
CPU CoreSTM8
Core Size8 Bit
CPU Maximum Speed16MHz
Oscillator TypeBuilt-in

Beschreibung

KI-Übersetzung

Value line series 16MHz STM8S 8-bit microcontroller with 8KB Flash, 128-byte data EEPROM, 10-bit ADC, 3 timers, and UART, SPI, I²C interfaces. Available in LQFP32 (7×7mm), TSSOP20 (6.5×6.4mm), and UFQFPN20 (3×3mm) packages.

Merkmale

KI-Übersetzung
  • 16 MHz advanced STM8 core with Harvard architecture and 3-stage pipeline Extended instruction set
  • Program memory: 8 Kbyte Flash memory; data retention 20 years at 55°C after 100 cycles
  • RAM: 1 Kbyte
  • Data memory: 128 bytes true data EEPROM; endurance up to 100 k write/erase cycles
  • 2.95 V to 5.5 V operating voltage
  • Flexible clock control, 4 master clock sources: Low-power crystal resonator oscillator, External clock input, Internal, user-trimmable 16 MHz RC, Internal low-power 128 kHz RC
  • Clock security system with clock monitor
  • Power management: Low-power modes (wait, active-halt, halt), Switch-off peripheral clocks individually, Permanently active, low-consumption power-on and power-down reset
  • Nested interrupt controller with 32 interrupts, Up to 27 external interrupts on 6 vectors
  • Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization
  • 16-bit general purpose timers, with 3 CAPCOM channels (IC, OC or PWM)
  • 8-bit basic timer with 8-bit prescaler
  • Auto wakeup timer
  • Window and independent watchdog timers
  • UART with clock output for synchronous operation, SmartCard, IrDA, LIN master mode
  • SPI interface up to 8 Mbit/s
  • I²C interface up to 400 Kbit/s
  • 10-bit ADC, ± 1 LSB ADC with up to 5 multiplexed channels, scan mode and analog watchdog
  • Up to 28 I/Os on a 32-pin package including 21 high-sink outputs
  • Highly robust I/O design, immune against current injection
  • Embedded single-wire interface module (SWIM) for fast on-chip programming and nonintrusive debugging