Abbildung ähnlich
EDA-ModelleEasyEDA
TOSHIBA TB6613FTG,8,EL
| Hersteller | |
| Herst.-Teilenr. | TB6613FTG,8,EL |
| LCSC-Nr. | C2150797 |
| Verp. | QFN-44-EP(5.3x5.3) |
| Kundennummer | |
| Hauptmerkm. | QFN-44-EP(5.3x5.3) Motor Drivers, Controllers RoHS |
| Datenblatt | TOSHIBA TB6613FTG,8,EL |
Produktspezifikationen
Alle
| Typ | Beschreibung | |
|---|---|---|
| Kategorie | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Hersteller | TOSHIBA | |
| Verp. | QFN-44-EP(5.3x5.3) | |
| Drive Type | Bipolar Driver | |
| Number of H-bridges | 5 | |
| Features | Motor step-out prevention function;Over temperature protection;Under-voltage lockout;Dead-time / shoot-through protection | |
| Technology | Yes | |
| Interface | Serial | |
| Operating Temperature | -20℃~+85℃ | |
| Output Current | 600mA | |
| Step Resolution | 8;256 | |
| Control Voltage | 3V~5.5V | |
| RDS(on) | 1.5Ω | |
| Motor Drive Voltage(Vm) | - |
| Typ | Beschreibung | |
|---|---|---|
| Kategorie | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Hersteller | TOSHIBA | |
| Verp. | QFN-44-EP(5.3x5.3) | |
| Drive Type | Bipolar Driver | |
| Number of H-bridges | 5 | |
| Features | Motor step-out prevention function;Over temperature protection;Under-voltage lockout;Dead-time / shoot-through protection | |
| Technology | Yes |
| Typ | Beschreibung | |
|---|---|---|
| Interface | Serial | |
| Operating Temperature | -20℃~+85℃ | |
| Output Current | 600mA | |
| Step Resolution | 8;256 | |
| Control Voltage | 3V~5.5V | |
| RDS(on) | 1.5Ω | |
| Motor Drive Voltage(Vm) | - |
Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >
Beschreibung
KI-Übersetzung
The TB6613FTG is a DC motor driver IC using LDMOS output transistors with low ON-resistance. The TB6613FTG incorporates five PWM constant-current H-bridge drivers, of which four drivers can be used for micro stepping motor drives of up to two stepping motors. The TB6613FTG is best suited to control various lens actuators in digital still cameras. The three-wire serial interface provides control over the drivers, thus reducing the number of lines required for interfacing with the control IC. Weight: 0.05 g (typ.)
Merkmale
KI-Übersetzung
- Motor power supply voltage: VM ≤ 6 V (max)
- Control power supply voltage: VCC = 3 V to 5.5 V
- Output current: IOUT ≤ 0.8 A (max)
- Complementally P- and N-channel LDMOS output transistors
- Output ON-resistance: RON (upper and lower sum) = 1.5 Ω (VM = VCC = 5 V typ.)
- Four H-bridge drivers capable of PWM constant-current control Supports up to two two-phase bipolar stepping motors (STMs) or up to four actuators.
- Each channel is individually configurable for either H-Bridge mode or STM μStep mode via the serial interface.
- In STM μStep mode, the micro stepping resolution is selectable from 6 bits (256 steps per full cycle) or 1 bit (8 steps per full cycle).
- One PWM constant-current driver. The constant-current reference voltage (Vref) is programmable via the internal 6-bit DAC.
- Each channel has a DAC for setting constant-current values (Channels A to D = 2 bits in H-Bridge mode and 2 bits × 6 bits in μStep mode; Channel E = 6 bits)
- Dedicated standby (power-save) pin
- Thermal shutdown (TSD)
- Undervoltage lockout (UVLO): Resets and disables the internal circuitry when VCC falls below 2.2 V (typ.).
- Small VQON44 package (0.4-mm lead pitch)
Anwendungen
KI-Übersetzung
- control various lens actuators in digital still cameras
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
| Stk. | E-Preis(Nur als Referenz) | Gesamtbetrag |
|---|---|---|
| 1+ | $ 1.434 | $ 1.43 |
| 200+ | $ 0.5557 | $ 111.14 |
| 500+ | $ 0.5357 | $ 267.85 |
| 1,000+ | $ 0.5264 | $ 526.40 |
Standardgehäuse2000/Full Reel | ||
Besserer Preis bei größerer Menge?
$
Produktspezifikationen
Alle
| Typ | Beschreibung | |
|---|---|---|
| Kategorie | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Hersteller | TOSHIBA | |
| Verp. | QFN-44-EP(5.3x5.3) | |
| Drive Type | Bipolar Driver | |
| Number of H-bridges | 5 | |
| Features | Motor step-out prevention function;Over temperature protection;Under-voltage lockout;Dead-time / shoot-through protection | |
| Technology | Yes | |
| Interface | Serial | |
| Operating Temperature | -20℃~+85℃ | |
| Output Current | 600mA | |
| Step Resolution | 8;256 | |
| Control Voltage | 3V~5.5V | |
| RDS(on) | 1.5Ω | |
| Motor Drive Voltage(Vm) | - |
| Typ | Beschreibung | |
|---|---|---|
| Kategorie | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Hersteller | TOSHIBA | |
| Verp. | QFN-44-EP(5.3x5.3) | |
| Drive Type | Bipolar Driver | |
| Number of H-bridges | 5 | |
| Features | Motor step-out prevention function;Over temperature protection;Under-voltage lockout;Dead-time / shoot-through protection | |
| Technology | Yes |
| Typ | Beschreibung | |
|---|---|---|
| Interface | Serial | |
| Operating Temperature | -20℃~+85℃ | |
| Output Current | 600mA | |
| Step Resolution | 8;256 | |
| Control Voltage | 3V~5.5V | |
| RDS(on) | 1.5Ω | |
| Motor Drive Voltage(Vm) | - |
Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >
Beschreibung
KI-Übersetzung
The TB6613FTG is a DC motor driver IC using LDMOS output transistors with low ON-resistance. The TB6613FTG incorporates five PWM constant-current H-bridge drivers, of which four drivers can be used for micro stepping motor drives of up to two stepping motors. The TB6613FTG is best suited to control various lens actuators in digital still cameras. The three-wire serial interface provides control over the drivers, thus reducing the number of lines required for interfacing with the control IC. Weight: 0.05 g (typ.)
Merkmale
KI-Übersetzung
- Motor power supply voltage: VM ≤ 6 V (max)
- Control power supply voltage: VCC = 3 V to 5.5 V
- Output current: IOUT ≤ 0.8 A (max)
- Complementally P- and N-channel LDMOS output transistors
- Output ON-resistance: RON (upper and lower sum) = 1.5 Ω (VM = VCC = 5 V typ.)
- Four H-bridge drivers capable of PWM constant-current control Supports up to two two-phase bipolar stepping motors (STMs) or up to four actuators.
- Each channel is individually configurable for either H-Bridge mode or STM μStep mode via the serial interface.
- In STM μStep mode, the micro stepping resolution is selectable from 6 bits (256 steps per full cycle) or 1 bit (8 steps per full cycle).
- One PWM constant-current driver. The constant-current reference voltage (Vref) is programmable via the internal 6-bit DAC.
- Each channel has a DAC for setting constant-current values (Channels A to D = 2 bits in H-Bridge mode and 2 bits × 6 bits in μStep mode; Channel E = 6 bits)
- Dedicated standby (power-save) pin
- Thermal shutdown (TSD)
- Undervoltage lockout (UVLO): Resets and disables the internal circuitry when VCC falls below 2.2 V (typ.).
- Small VQON44 package (0.4-mm lead pitch)
Anwendungen
KI-Übersetzung
- control various lens actuators in digital still cameras
C2150797 EasyEDA-Bibliothek
Compliance & Exportcodes
| Typ | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Typ | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC |
| Typ | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |