VISHAY SA7.0A-E3/54

제조업체	VISHAY
제조사 품번	SA7.0A-E3/54
LCSC 번호	C1979879
포장	DO-15(DO-204AC)
고객 번호
주요 제원	12VC Clamp 41.7A Ipp TVS DIODE DO-15(DO-204AC)
데이터시트	VISHAY SA7.0A-E3/54
RoHS 준수	1개 문서 이용 가능

제품 사양

전체

타입	설명
카테고리	Circuit Protection/Transient Voltage Suppressors (TVS)/TVS Diodes
제조업체	VISHAY
포장	DO-15(DO-204AC)
Clamping Voltage	12V
Peak Pulse Current (Ipp)	41.7A
Peak Pulse Power Dissipation (Ppp)	500W@10/1000us
Number of Channels	1
Voltage - Breakdown	7.78V
type	TVS
Reverse Leakage Current (Ir)	50uA
Polarity	Unidirectional
Reverse Stand-Off Voltage (Vrwm)	7V

타입	설명
카테고리	Circuit Protection/Transient Voltage Suppressors (TVS)/TVS Diodes
제조업체	VISHAY
포장	DO-15(DO-204AC)
Clamping Voltage	12V
Peak Pulse Current (Ipp)	41.7A
Peak Pulse Power Dissipation (Ppp)	500W@10/1000us

AI 번역

Glass passivated chip junction
Available in uni-directional and bi-directional
500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 %
Excellent clamping capability
Very fast response time
Low incremental surge resistance
Solder dip 275 °C max. 10 s, per JESD 22-B106
AEC-Q101 qualified

AI 번역

Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, and telecommunication.

모든 주문 보장

100% 정품 · 30일 반품 또는 교환

품절

재입고 알림

최소값: 1배수: 1판매 단위: Piece

BOM 목록에 추가

수량이 많을수록 더 좋은 가격?

전체

타입	설명
카테고리	Circuit Protection/Transient Voltage Suppressors (TVS)/TVS Diodes
제조업체	VISHAY
포장	DO-15(DO-204AC)
Clamping Voltage	12V
Peak Pulse Current (Ipp)	41.7A
Peak Pulse Power Dissipation (Ppp)	500W@10/1000us
Number of Channels	1
Voltage - Breakdown	7.78V
type	TVS
Reverse Leakage Current (Ir)	50uA
Polarity	Unidirectional
Reverse Stand-Off Voltage (Vrwm)	7V

타입	설명
카테고리	Circuit Protection/Transient Voltage Suppressors (TVS)/TVS Diodes
제조업체	VISHAY
포장	DO-15(DO-204AC)
Clamping Voltage	12V
Peak Pulse Current (Ipp)	41.7A
Peak Pulse Power Dissipation (Ppp)	500W@10/1000us

AI 번역

Glass passivated chip junction
Available in uni-directional and bi-directional
500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 %
Excellent clamping capability
Very fast response time
Low incremental surge resistance
Solder dip 275 °C max. 10 s, per JESD 22-B106
AEC-Q101 qualified

AI 번역

Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, and telecommunication.