ST VND600P-E
| Hersteller | |
| Herst.-Teilenr. | VND600P-E |
| LCSC-Nr. | C1556785 |
| Verp. | SO-16-300mil |
| Kundennummer | |
| Hauptmerkm. | 2 Active High High Side Switch SO-16-300mil Power Distribution Switches, Load Drivers |
| Datenblatt | ST VND600P-E |
Produktspezifikationen
| Typ | Beschreibung | |
|---|---|---|
| Kategorie | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Hersteller | ST | |
| Verp. | SO-16-300mil | |
| Operating Temperature | -40℃~+150℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout;Reverse voltage protection | |
| number of channels | 2 | |
| Control Input Logic | Active High | |
| Maximum Continuous Current | - | |
| Operating Voltage | 5.5V~36V | |
| RDS(on) | 35mΩ | |
| Type | High Side Switch |
| Typ | Beschreibung | |
|---|---|---|
| Kategorie | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Hersteller | ST | |
| Verp. | SO-16-300mil | |
| Operating Temperature | -40℃~+150℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout;Reverse voltage protection | |
| number of channels | 2 |
| Typ | Beschreibung | |
|---|---|---|
| Control Input Logic | Active High | |
| Maximum Continuous Current | - | |
| Operating Voltage | 5.5V~36V | |
| RDS(on) | 35mΩ | |
| Type | High Side Switch |
Beschreibung
The VND600P-E is a double chip device designed in VIPower M0-3 technology. The device is intended for driving any type of load with one side connected to ground. The active VCC pin voltage clamp protects the device against low energy spikes. Active current limitation combined with thermal shutdown and automatic restart protect the device against overload. The device integrates an analog current sense output which delivers a current proportional to the load current. The device automatically turns off in the case where the ground pin becomes disconnected.
Merkmale
- Per channel with all the output pins connected to the PCB.
- CMOS-compatible input
- Proportional load current sense
- Shorted load protection
- Undervoltage and overvoltage shutdown
- Overvoltage clamp
- Thermal shutdown
- Current limitation
- Protection against loss of ground and loss of VCC
- Very low standby power dissipation
- Reverse battery protected
| Stk. | E-Preis(Nur als Referenz) | Gesamtbetrag |
|---|---|---|
| 1+ | $ 2.6733 | $ 2.67 |
| 200+ | $ 1.0342 | $ 206.84 |
| 500+ | $ 0.9987 | $ 499.35 |
| 1,000+ | $ 0.9802 | $ 980.20 |
Standardgehäuse49/Full Tube | ||
Produktspezifikationen
| Typ | Beschreibung | |
|---|---|---|
| Kategorie | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Hersteller | ST | |
| Verp. | SO-16-300mil | |
| Operating Temperature | -40℃~+150℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout;Reverse voltage protection | |
| number of channels | 2 | |
| Control Input Logic | Active High | |
| Maximum Continuous Current | - | |
| Operating Voltage | 5.5V~36V | |
| RDS(on) | 35mΩ | |
| Type | High Side Switch |
| Typ | Beschreibung | |
|---|---|---|
| Kategorie | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Hersteller | ST | |
| Verp. | SO-16-300mil | |
| Operating Temperature | -40℃~+150℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout;Reverse voltage protection | |
| number of channels | 2 |
| Typ | Beschreibung | |
|---|---|---|
| Control Input Logic | Active High | |
| Maximum Continuous Current | - | |
| Operating Voltage | 5.5V~36V | |
| RDS(on) | 35mΩ | |
| Type | High Side Switch |
Beschreibung
The VND600P-E is a double chip device designed in VIPower M0-3 technology. The device is intended for driving any type of load with one side connected to ground. The active VCC pin voltage clamp protects the device against low energy spikes. Active current limitation combined with thermal shutdown and automatic restart protect the device against overload. The device integrates an analog current sense output which delivers a current proportional to the load current. The device automatically turns off in the case where the ground pin becomes disconnected.
Merkmale
- Per channel with all the output pins connected to the PCB.
- CMOS-compatible input
- Proportional load current sense
- Shorted load protection
- Undervoltage and overvoltage shutdown
- Overvoltage clamp
- Thermal shutdown
- Current limitation
- Protection against loss of ground and loss of VCC
- Very low standby power dissipation
- Reverse battery protected
C1556785 EasyEDA-Bibliothek
Compliance & Exportcodes
| Typ | Details |
|---|---|
| ECCN | EAR99 |
| CNHTS | 8536500090 |
| USHTS | 8536507000 |
| TARIC | 8536500300 |
| CAHTS | 8536501000 |
| BRHTS | 85365090 |
| INHTS | 85365090 |
| MXHTS | 8536.50.09 |
| Typ | Details |
|---|---|
| ECCN | EAR99 |
| CNHTS | 8536500090 |
| USHTS | 8536507000 |
| TARIC | 8536500300 |
| Typ | Details |
|---|---|
| CAHTS | 8536501000 |
| BRHTS | 85365090 |
| INHTS | 85365090 |
| MXHTS | 8536.50.09 |