Nexperia NXS0104BQ-Q100X
| 製造商 | |
| 製造商料號 | NXS0104BQ-Q100X |
| LCSC 編號 | C551626 |
| 包裝 | SOT762-1 |
| 客戶編號 | |
| 關鍵特性 | Dual-supply voltage translation transceiver, open-drain, automatic direction sensing |
| 數據手冊 | Nexperia NXS0104BQ-Q100X |
| RoHS 合規 | 2 份文件可用 |
產品規格
| 類型 | 描述 | |
|---|---|---|
| 類別 | Integrated Circuits (ICs)/Logic/Specialty Logic | |
| 製造商 | Nexperia | |
| 包裝 | SOT762-1 | |
| Operating Temperature | -40℃~+125℃ | |
| Function | Automatic direction detection;Power-off protection;Output enable high-impedance;Integrated pull-up resistor | |
| Channel Type | Bidirectional | |
| Interface | I2C;1-Wire Bus | |
| Voltage - Supply | 2.3V~5.5V;1.65V~3.6V | |
| Data Rate | 24Mbps | |
| Current - Output Low(IOL) | - | |
| Output Type | Tri-State | |
| Number of Gates | 1;- | |
| Current - Output High(IOH) | - |
| 類型 | 描述 | |
|---|---|---|
| 類別 | Integrated Circuits (ICs)/Logic/Specialty Logic | |
| 製造商 | Nexperia | |
| 包裝 | SOT762-1 | |
| Operating Temperature | -40℃~+125℃ | |
| Function | Automatic direction detection;Power-off protection;Output enable high-impedance;Integrated pull-up resistor | |
| Channel Type | Bidirectional | |
| Interface | I2C;1-Wire Bus |
| 類型 | 描述 | |
|---|---|---|
| Voltage - Supply | 2.3V~5.5V;1.65V~3.6V | |
| Data Rate | 24Mbps | |
| Current - Output Low(IOL) | - | |
| Output Type | Tri-State | |
| Number of Gates | 1;- | |
| Current - Output High(IOH) | - |
概述
The NXS0104-Q100 is a 4-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 4-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 1.65 V and 3.6 V and VCC(B) can be supplied at any voltage between 2.3 V and 5.5 V, making the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.
特性
- Automotive product qualification in accordance with AEC-Q100 (Grade 1)
- Specified from -40 °C to +85 °C and from -40 °C to +125 °C
- Wide supply voltage range: VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V
- Maximum data rates: Push-pull: 24 Mbps
- IOFF circuitry provides partial Power-down mode operation
- Inputs accept voltages up to 5.5 V
- ESD protection:
- HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2500 V for A port
- HBM: ANSI/ESDA/JEDEC JS-001 class 3B exceeds 15000 V for B port
- CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V
- IEC61000-4-2 contact discharge exceeds 8000 V for B port
- Latch-up performance exceeds 100 mA per JESD 78B Class II
- Multiple package options
- DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints
- Dual supply translating transceiver; open drain; auto direction sensing
應用領域
- Voltage level translation applications
- Point-to-point applications, interfacing between devices or systems operating at different supply voltages
- Primarily targeting I2C or 1-Wire with open-drain drivers
- Also suitable for push-pull driver to port applications, though NXB0104-Q100 may be more appropriate
- Automotive applications
產品規格
| 類型 | 描述 | |
|---|---|---|
| 類別 | Integrated Circuits (ICs)/Logic/Specialty Logic | |
| 製造商 | Nexperia | |
| 包裝 | SOT762-1 | |
| Operating Temperature | -40℃~+125℃ | |
| Function | Automatic direction detection;Power-off protection;Output enable high-impedance;Integrated pull-up resistor | |
| Channel Type | Bidirectional | |
| Interface | I2C;1-Wire Bus | |
| Voltage - Supply | 2.3V~5.5V;1.65V~3.6V | |
| Data Rate | 24Mbps | |
| Current - Output Low(IOL) | - | |
| Output Type | Tri-State | |
| Number of Gates | 1;- | |
| Current - Output High(IOH) | - |
| 類型 | 描述 | |
|---|---|---|
| 類別 | Integrated Circuits (ICs)/Logic/Specialty Logic | |
| 製造商 | Nexperia | |
| 包裝 | SOT762-1 | |
| Operating Temperature | -40℃~+125℃ | |
| Function | Automatic direction detection;Power-off protection;Output enable high-impedance;Integrated pull-up resistor | |
| Channel Type | Bidirectional | |
| Interface | I2C;1-Wire Bus |
| 類型 | 描述 | |
|---|---|---|
| Voltage - Supply | 2.3V~5.5V;1.65V~3.6V | |
| Data Rate | 24Mbps | |
| Current - Output Low(IOL) | - | |
| Output Type | Tri-State | |
| Number of Gates | 1;- | |
| Current - Output High(IOH) | - |
概述
The NXS0104-Q100 is a 4-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 4-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 1.65 V and 3.6 V and VCC(B) can be supplied at any voltage between 2.3 V and 5.5 V, making the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.
特性
- Automotive product qualification in accordance with AEC-Q100 (Grade 1)
- Specified from -40 °C to +85 °C and from -40 °C to +125 °C
- Wide supply voltage range: VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V
- Maximum data rates: Push-pull: 24 Mbps
- IOFF circuitry provides partial Power-down mode operation
- Inputs accept voltages up to 5.5 V
- ESD protection:
- HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2500 V for A port
- HBM: ANSI/ESDA/JEDEC JS-001 class 3B exceeds 15000 V for B port
- CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V
- IEC61000-4-2 contact discharge exceeds 8000 V for B port
- Latch-up performance exceeds 100 mA per JESD 78B Class II
- Multiple package options
- DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints
- Dual supply translating transceiver; open drain; auto direction sensing
應用領域
- Voltage level translation applications
- Point-to-point applications, interfacing between devices or systems operating at different supply voltages
- Primarily targeting I2C or 1-Wire with open-drain drivers
- Also suitable for push-pull driver to port applications, though NXB0104-Q100 may be more appropriate
- Automotive applications
C551626 EasyEDA 元器件庫
合規 & 出口編碼
| 類型 | 詳情 |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| 類型 | 詳情 |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| 類型 | 詳情 |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |



