TI BQ40Z50RSMR-R2
| 製造商 | |
| 製造商料號 | BQ40Z50RSMR-R2 |
| LCSC 編號 | C2845123 |
| 包裝 | VQFN-32-EP(4x4) |
| 客戶編號 | |
| 關鍵特性 | 1-cell, 2-cell, 3-cell, and 4-cell series-connected lithium-ion battery pack managers |
| 數據手冊 | TI BQ40Z50RSMR-R2 |
| RoHS 合規 | 3 份文件可用 |
產品規格
| 類型 | 描述 | |
|---|---|---|
| 類別 | Integrated Circuits (ICs)/Power Management (PMIC)/Battery Management | |
| 製造商 | TI | |
| 包裝 | VQFN-32-EP(4x4) | |
| Operating Temperature | -40℃~+85℃ | |
| Interface | SMBus | |
| Quiescent Current | 336uA | |
| 0V Battery Charge | - | |
| Type of Battery | Lithium Battery | |
| Operating Voltage | 2.2V~26V | |
| Features | Cell balancing;Overvoltage Protection;Overcurrent Protection;Short-Circuit Protection;Over-discharge protection | |
| The Chip Type | Protection IC;Monitoring IC | |
| Balance Current | - | |
| Charge Current - Max | - |
| 類型 | 描述 | |
|---|---|---|
| 類別 | Integrated Circuits (ICs)/Power Management (PMIC)/Battery Management | |
| 製造商 | TI | |
| 包裝 | VQFN-32-EP(4x4) | |
| Operating Temperature | -40℃~+85℃ | |
| Interface | SMBus | |
| Quiescent Current | 336uA | |
| 0V Battery Charge | - |
| 類型 | 描述 | |
|---|---|---|
| Type of Battery | Lithium Battery | |
| Operating Voltage | 2.2V~26V | |
| Features | Cell balancing;Overvoltage Protection;Overcurrent Protection;Short-Circuit Protection;Over-discharge protection | |
| The Chip Type | Protection IC;Monitoring IC | |
| Balance Current | - | |
| Charge Current - Max | - |
概述
The BQ40Z50-R2 device employs the patented Impedance Track™ technology. It is a fully integrated, single-chip, battery pack-based solution that offers various features such as charge monitoring, protection, and authentication for 1-cell, 2-cell, 3-cell, and 4-cell series-connected lithium-ion and lithium-polymer battery packs. The BQ40Z50-R2 device utilizes its integrated high-performance analog peripherals to measure the available capacity, voltage, current, temperature, and other key parameters of lithium-ion or lithium-polymer batteries, maintains accurate data records, and reports this information to the system host controller via an SMBus v1.1 compatible interface. The BQ40Z50-R2 device supports TURBO Mode 2.0 by providing the available max power and max current to the host system. The device also supports Battery Trip Point to send a BTP interrupt signal to the host system at the preset state of charge thresholds. The BQ40Z50-R2 provides software-based 1st- and 2nd-level safety protection against overvoltage, undervoltage, overcurrent, short-circuit current, overload, and overtemperature conditions, as well as other pack- and cell-related faults. SHA-1 authentication, with secure memory for authentication keys, enables identification of genuine battery packs. The compact 32-lead QFN package minimizes solution cost and size for smart batteries while providing maximum functionality and safety for battery gauging applications.
特性
- Fully integrated 1-cell, 2-cell, 3-cell, and 4-cell series Li-Ion or Li-Polymer battery pack manager and protection
- Patented next-generation Impedance Track™ technology for accurate available capacity measurement in Li-Ion and Li-Polymer batteries
- High-side N-channel protection FET driver
- Integrated cell balancing during charging or rest state
- Suitable for batteries between 100mAh and 29Ah
- Comprehensive programmable protection features
- Voltage
- Current
- Temperature
- Charge termination time
- CHG/DSG FET – Analog Front End (AFE)
- Precision charging algorithms – JEITA enhanced charging, adaptive charging, cell balancing
- Turbo Mode 2.0 support
- Battery Trip Point (BTP) support
- Diagnostic lifetime data monitor and black box recorder
- LED display support
- Two-wire SMBus v1.1 interface
- Secure Hash Algorithm (SHA-1) authentication
- IATA support
- Compact package: 32-lead QFN (RSM)
應用領域
- Tablets
- Drones
- UPS/battery backup systems
- Medical devices
- Handheld vacuum cleaners and robotic vacuum cleaners
產品規格
| 類型 | 描述 | |
|---|---|---|
| 類別 | Integrated Circuits (ICs)/Power Management (PMIC)/Battery Management | |
| 製造商 | TI | |
| 包裝 | VQFN-32-EP(4x4) | |
| Operating Temperature | -40℃~+85℃ | |
| Interface | SMBus | |
| Quiescent Current | 336uA | |
| 0V Battery Charge | - | |
| Type of Battery | Lithium Battery | |
| Operating Voltage | 2.2V~26V | |
| Features | Cell balancing;Overvoltage Protection;Overcurrent Protection;Short-Circuit Protection;Over-discharge protection | |
| The Chip Type | Protection IC;Monitoring IC | |
| Balance Current | - | |
| Charge Current - Max | - |
| 類型 | 描述 | |
|---|---|---|
| 類別 | Integrated Circuits (ICs)/Power Management (PMIC)/Battery Management | |
| 製造商 | TI | |
| 包裝 | VQFN-32-EP(4x4) | |
| Operating Temperature | -40℃~+85℃ | |
| Interface | SMBus | |
| Quiescent Current | 336uA | |
| 0V Battery Charge | - |
| 類型 | 描述 | |
|---|---|---|
| Type of Battery | Lithium Battery | |
| Operating Voltage | 2.2V~26V | |
| Features | Cell balancing;Overvoltage Protection;Overcurrent Protection;Short-Circuit Protection;Over-discharge protection | |
| The Chip Type | Protection IC;Monitoring IC | |
| Balance Current | - | |
| Charge Current - Max | - |
概述
The BQ40Z50-R2 device employs the patented Impedance Track™ technology. It is a fully integrated, single-chip, battery pack-based solution that offers various features such as charge monitoring, protection, and authentication for 1-cell, 2-cell, 3-cell, and 4-cell series-connected lithium-ion and lithium-polymer battery packs. The BQ40Z50-R2 device utilizes its integrated high-performance analog peripherals to measure the available capacity, voltage, current, temperature, and other key parameters of lithium-ion or lithium-polymer batteries, maintains accurate data records, and reports this information to the system host controller via an SMBus v1.1 compatible interface. The BQ40Z50-R2 device supports TURBO Mode 2.0 by providing the available max power and max current to the host system. The device also supports Battery Trip Point to send a BTP interrupt signal to the host system at the preset state of charge thresholds. The BQ40Z50-R2 provides software-based 1st- and 2nd-level safety protection against overvoltage, undervoltage, overcurrent, short-circuit current, overload, and overtemperature conditions, as well as other pack- and cell-related faults. SHA-1 authentication, with secure memory for authentication keys, enables identification of genuine battery packs. The compact 32-lead QFN package minimizes solution cost and size for smart batteries while providing maximum functionality and safety for battery gauging applications.
特性
- Fully integrated 1-cell, 2-cell, 3-cell, and 4-cell series Li-Ion or Li-Polymer battery pack manager and protection
- Patented next-generation Impedance Track™ technology for accurate available capacity measurement in Li-Ion and Li-Polymer batteries
- High-side N-channel protection FET driver
- Integrated cell balancing during charging or rest state
- Suitable for batteries between 100mAh and 29Ah
- Comprehensive programmable protection features
- Voltage
- Current
- Temperature
- Charge termination time
- CHG/DSG FET – Analog Front End (AFE)
- Precision charging algorithms – JEITA enhanced charging, adaptive charging, cell balancing
- Turbo Mode 2.0 support
- Battery Trip Point (BTP) support
- Diagnostic lifetime data monitor and black box recorder
- LED display support
- Two-wire SMBus v1.1 interface
- Secure Hash Algorithm (SHA-1) authentication
- IATA support
- Compact package: 32-lead QFN (RSM)
應用領域
- Tablets
- Drones
- UPS/battery backup systems
- Medical devices
- Handheld vacuum cleaners and robotic vacuum cleaners
C2845123 EasyEDA 元器件庫
合規 & 出口編碼
| 類型 | 詳情 |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| 類型 | 詳情 |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| 類型 | 詳情 |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |



