Intel/Altera EPM570T100I5N
| 製造商 | |
| 製造商料號 | EPM570T100I5N |
| LCSC 編號 | C27319 |
| 包裝 | TQFP-100(14x14) |
| 客戶編號 | |
| 關鍵特性 | 570 570 In-system programming TQFP-100(14x14) CPLDs (Complex Programmable Logic Devices) RoHS |
| 數據手冊 | Intel/Altera EPM570T100I5N |
| RoHS 合規 | 1 份文件可用 |
| 替代料件 | 5 |
產品規格
| 類型 | 描述 | |
|---|---|---|
| 類別 | Integrated Circuits (ICs)/Embedded/CPLDs (Complex Programmable Logic Devices) | |
| 製造商 | Intel/Altera | |
| 包裝 | TQFP-100(14x14) | |
| Operating Temperature | -40℃~+100℃ | |
| Number of Logic Elements/Blocks | 570 | |
| Number of LAB/CLBs | 570 | |
| Programmable Type | In-system programming |
| 類型 | 描述 | |
|---|---|---|
| 類別 | Integrated Circuits (ICs)/Embedded/CPLDs (Complex Programmable Logic Devices) | |
| 製造商 | Intel/Altera | |
| 包裝 | TQFP-100(14x14) | |
| Operating Temperature | -40℃~+100℃ |
| 類型 | 描述 | |
|---|---|---|
| Number of Logic Elements/Blocks | 570 | |
| Number of LAB/CLBs | 570 | |
| Programmable Type | In-system programming |
概述
The MAX II family of instant-on, non-volatile CPLDs is based on a 0.18-μm, 6-layer-metal-flash process, with densities from 240 to 2,210 logic elements (LEs) (128 to 2,210 equivalent macrocells) and non-volatile storage of 8 Kbits. MAX II devices offer high I/O counts, fast performance, and reliable fitting versus other CPLD architectures. Featuring MultiVolt™ core, a user flash memory (UFM) block, and enhanced in-system programmability (ISP), MAX II devices are designed to reduce cost and power while providing programmable solutions for applications such as bus bridging, I/O expansion, power-on reset (POR) and sequencing control, and device configuration control.
特性
- Low-cost, low-power CPLD
- Instant-on, non-volatile architecture
- Standby current as low as 2 mA
- Provides fast propagation delay and clock-to-output times
- Provides four global clocks with two clocks available per logic array block (LAB)
- UFM block up to 8 Kbits for non-volatile storage
- MultiVolt core enabling external supply voltages to the device of either 3.3 V/2.5 V or 1.8 V
- MultiVolt I/O interface supporting 3.3-V, 2.5-V, 1.8-V, and 1.5-V logic levels
- Bus-friendly architecture including programmable slew rate, drive strength, bus-hold, and programmable pull-up resistors
- Schmitt triggers enabling noise tolerant inputs (programmable per pin)
- Fully compliant with the Peripheral Component Interconnect Special Interest Group (PCI SIG) PCI Local Bus Specification, Revision 2.2 for 3.3-V operation at 66 MHz
- Supports hot-socketing
- Built-in Joint Test Action Group (JTAG) boundary-scan test (BST) circuitry compliant with IEEE Std. 1149.1-1990
- ISP circuitry compliant with IEEE Std. 1532
應用領域
- bus bridging
- I/O expansion
- power-on reset (POR) and sequencing control
- device configuration control
產品規格
| 類型 | 描述 | |
|---|---|---|
| 類別 | Integrated Circuits (ICs)/Embedded/CPLDs (Complex Programmable Logic Devices) | |
| 製造商 | Intel/Altera | |
| 包裝 | TQFP-100(14x14) | |
| Operating Temperature | -40℃~+100℃ | |
| Number of Logic Elements/Blocks | 570 | |
| Number of LAB/CLBs | 570 | |
| Programmable Type | In-system programming |
| 類型 | 描述 | |
|---|---|---|
| 類別 | Integrated Circuits (ICs)/Embedded/CPLDs (Complex Programmable Logic Devices) | |
| 製造商 | Intel/Altera | |
| 包裝 | TQFP-100(14x14) | |
| Operating Temperature | -40℃~+100℃ |
| 類型 | 描述 | |
|---|---|---|
| Number of Logic Elements/Blocks | 570 | |
| Number of LAB/CLBs | 570 | |
| Programmable Type | In-system programming |
概述
The MAX II family of instant-on, non-volatile CPLDs is based on a 0.18-μm, 6-layer-metal-flash process, with densities from 240 to 2,210 logic elements (LEs) (128 to 2,210 equivalent macrocells) and non-volatile storage of 8 Kbits. MAX II devices offer high I/O counts, fast performance, and reliable fitting versus other CPLD architectures. Featuring MultiVolt™ core, a user flash memory (UFM) block, and enhanced in-system programmability (ISP), MAX II devices are designed to reduce cost and power while providing programmable solutions for applications such as bus bridging, I/O expansion, power-on reset (POR) and sequencing control, and device configuration control.
特性
- Low-cost, low-power CPLD
- Instant-on, non-volatile architecture
- Standby current as low as 2 mA
- Provides fast propagation delay and clock-to-output times
- Provides four global clocks with two clocks available per logic array block (LAB)
- UFM block up to 8 Kbits for non-volatile storage
- MultiVolt core enabling external supply voltages to the device of either 3.3 V/2.5 V or 1.8 V
- MultiVolt I/O interface supporting 3.3-V, 2.5-V, 1.8-V, and 1.5-V logic levels
- Bus-friendly architecture including programmable slew rate, drive strength, bus-hold, and programmable pull-up resistors
- Schmitt triggers enabling noise tolerant inputs (programmable per pin)
- Fully compliant with the Peripheral Component Interconnect Special Interest Group (PCI SIG) PCI Local Bus Specification, Revision 2.2 for 3.3-V operation at 66 MHz
- Supports hot-socketing
- Built-in Joint Test Action Group (JTAG) boundary-scan test (BST) circuitry compliant with IEEE Std. 1149.1-1990
- ISP circuitry compliant with IEEE Std. 1532
應用領域
- bus bridging
- I/O expansion
- power-on reset (POR) and sequencing control
- device configuration control
C27319 EasyEDA 元器件庫
合規 & 出口編碼
| 類型 | 詳情 |
|---|---|
| RoHS | ROHS Compliant |
| ECCN | EAR99 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| 類型 | 詳情 |
|---|---|
| RoHS | ROHS Compliant |
| ECCN | EAR99 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC |
| 類型 | 詳情 |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |



