LCSC Electronics logoLCSC Electronics svg logo
Entrar
USD

TI TPS5430DDAR

Fabricante
Cód. da peça
TPS5430DDAR
Nº LCSC
C9864
Emb.
SOIC-8-EP
Número do Cliente
Atrib. princ.
3-A, Wide Input Range, Step-Down Converter
Folha de DadosTI TPS5430DDAR
Conformidade RoHS2 documentos disponíveis
Peças alternativas5
Garantia em cada pedido
100% Autêntico · Devolução ou Substituição em 30 Dias

Especificações do Produto

Tudo
TipoDescrição
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - DC DC Switching Regulators
FabricanteTI
Emb.SOIC-8-EP
Operating Temperature-40℃~+125℃@(TJ)
Frequency - Switching500kHz
FunctionStep-down type
Number of Outputs1
FeaturesCycle-by-cycle current limiting;Hiccup current limiting;Overcurrent Protection
Output TypeAdjustable
TopologyBuck
Operating Voltage5.5V~36V
Switch tube (built-in/external)Built-in
Output Voltage1.221V~32.04V
Output Current3A
Quiescent Current4.4mA

Descrição

Tradução por IA

The TPS543x is a high-output-current PWM converter that integrates a low-resistance, high-side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an undervoltagelockout circuit to prevent start-up until the input voltage reaches 5.5 V; an internally set slow-start circuit to limit inrush currents; and a voltage feedforward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 18 μA typically. Other features include an active-high enable, overcurrent limiting, over-voltage protection and thermal shutdown. To reduce design complexity and external component count, the TPS543x feedback loop is internally compensated. The TPS5431 is intended to operate from power rails up to 23 V. The TPS5430 regulates a wide variety of power sources including 24 V bus. The TPS543x device is available in a thermally enhanced, easy to use 8-pin SOIC PowerPAD package. TI provides evaluation modules and the Designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.

Recursos

Tradução por IA
  • Wide Input Voltage Range:
    • TPS5430: 5.5 V to 36 V
    • TPS5431: 5.5 V to 23 V
  • Up to 3-A Continuous (4-A Peak) Output Current
  • High Efficiency up to 95% Enabled by 110 mΩ Integrated MOSFET Switch
  • Wide Output Voltage Range: Adjustable Down to 1.22 V with 1.5% Initial Accuracy
  • Internal Compensation Minimizes External Parts Count
  • Fixed 500 kHz Switching Frequency for Small Filter Size
  • Improved Line Regulation and Transient Response by Input Voltage Feed Forward
  • System Protected by Overcurrent Limiting, Overvoltage Protection and Thermal Shutdown
  • -40°C to 125°C Operating Junction Temperature Range
  • Available in Small Thermally Enhanced 8-Pin SO PowerPAD Package

Aplicações

Tradução por IA
  • Consumer: Set-top Box, DVD, LCD Displays
  • Industrial and Car Audio Power Supplies
  • Battery Chargers, High Power LED Supply
  • 12-V/24-V Distributed Power Systems

Perguntas frequentes do produto


  • 1. Is the TPS5430DDAR Compatible With 24-V Industrial Power Systems?
    Yes, it is fully compatible. The TPS5430DDAR supports a wide input voltage range from 5.5 V to 36 V, making it well-suited for standard 12-V and 24-V distributed power buses while providing a regulated step-down output current up to 3 A.
  • 2. What Are Suitable Direct or Alternative Replacements Through LCSC?
    Higher-current options from the same family, such as the TPS5450DDAR (5-A rating), serve as direct upgrades. For cost-effective pin-compatible alternatives, consider Richtek options like the RT8289GSP or RT8279GSP, depending on your system requirements.
  • 3. What Are the Primary Application Scenarios for This Step-Down Converter?
    The TPS5430DDAR is ideal for consumer electronics like set-top boxes, LCD displays, and DVD players, as well as industrial equipment, automotive audio systems, battery chargers, high-power LED drivers, and general 12-V or 24-V distributed DC power rails.
  • 4. What Are the Key Technical Specifications of the TPS5430DDAR?
    Key specifications include an input range of 5.5 V to 36 V, adjustable output voltage from 1.221 V to 32.04 V, 3-A continuous output current, 500-kHz fixed switching frequency, internal compensation, integrated 110-m惟 MOSFET, and an 8-pin SOIC PowerPAD package.
  • 5. How Should Thermal Management Be Implemented During PCB Layout?
    Since the TPS5430DDAR comes in an SOIC-8-EP PowerPAD package, you must solder the exposed bottom thermal pad directly to a copper ground plane on the PCB with multiple thermal vias to effectively dissipate heat under heavy 3-A continuous load conditions.