MICROCHIP PIC16LF1566-E/SO

The PIC16LF1566/1567 microcontrollers deliver unique on- chip features for the design of mTouch solutions and general purpose applications in 28/40/44- pin count packages. Two 10- bit high- speed ADCs with automated hardware CVD modules connect up to 34 analog channels to achieve a total sampling rate of 600k samples per second. This family provides mutual capacitance output drivers on all analog channels, two PWMs, two MSSP modules with low input- voltage options and one EUSART, which makes this family an excellent solution to implement low- power and noise- robust capacitive sensing and other front- end sampling applications with minimal software overhead.

• C Compiler Optimized RISC Architecture
• Only 49 Instructions
• Operating Speed:
  • 0 - 32 MHz clock input
  • 125 ns minimum instruction cycle
• Interrupt Capability
  • 16- Level Deep Hardware Stack
  • Up to Three 8- Bit Timers
  • One 16- Bit Timer
  • Power- on Reset (POR)
  • Power- up Timer (PWRT)
  • Low- Power Brown- Out Reset (LPBOR)
  • Programmable Watchdog Timer (WDT) up to 256s
  • Programmable Code Protection
• 8k Words Flash Program Memory
• 1024 Bytes Data SRAM Memory
• Direct, Indirect and Relative Addressing modes
• Operating Voltage Range:
  • 1.8V to 3.6V
• Temperature Range:
  • Industrial: - 40°C to 85°C
  • Extended: - 40°C to 125°C
• Sleep mode: 50 nA at 1.8V, typical
• Watchdog Timer: 500 nA at 1.8V, typical
• Operating Current: 8uA at 32 kHz, 1.8V, typical; 32uA/MHz at 1.8V, typical
• PWM: Two 10- bit Pulse- Width Modulators
  • Output on up to five pins per PWM at the same time
• Dual Master Synchronous Serial Port (MSSP) with SPI and I²C:
  • 7- bit address masking
  • SMBus/PMBus compatibility
  • Configurable low input voltage threshold for I²C
• Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART):
  • RS- 232, RS- 485, and LIN compatible
  • Auto- Baud Detect
  • Auto- wake- up on start
• Up to 35 I/O Pins and One Input Pin: Individually programmable pull- ups; Interrupt- on- change with edge- select
• Dual 10- Bit Analog- to- Digital Converter (ADC):
  • Up to 35 external channels
  • Conversion available during Sleep
  • Temperature indicator
  • Simultaneous sampling on two ADCs
  • Connect multiple channels together for sampling
  • External conversion trigger
  • Fixed Voltage Reference as a channel
  • External pin as positive ADC voltage reference
  • Combined 600k samples per second
• Hardware Capacitive Voltage Divider (CVD)
  • Double- sample conversions
  • Two sets of result registers
  • 7- bit precharge timer
  • 7- bit acquisition timer
  • Two guard ring output drives
  • Mutual capacitance TX output on any analog channel
  • 30 pF adjustable sample and hold capacitor
• Internal Voltage Reference Module
• 16 MHz Internal Oscillator Block:
  • ±1% at calibration
  • Selectable frequency range from 0 to 32 MHz
  • 31 kHz Low- Power Internal Oscillator
  • External Oscillator Block with:
  • Two external clock modes up to 32 MHz
  • Oscillator Start- up Timer (OST)
• In- Circuit Debug Integrated On- Chip
• Emulation Header for Advanced Debug:
  • Provides trace, background debug and up to 32 hardware break points
• In- Circuit Serial Programming (ICSP) via Two Pins