LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD

ADI LTM4606IV#PBF

Produttore
Cod. Prod.
LTM4606IV#PBF
Cod. LCSC
C581096
Imballo
LGA-133(15x15)
Numero Cliente
Attr. chiave
Step-down type 600mV~5V 4.5V~28V LGA-133(15x15) DC DC Converters RoHS
Scheda TecnicaADI LTM4606IV#PBF
Conformità RoHS1 documenti disponibili
Parti alternative2
Garanzia su ogni ordine
100% Autentico · Reso o Sostituzione entro 30 Giorni

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaPower Supplies/Power Suppliers - Board Mount/DC DC Converters
ProduttoreADI
ImballoLGA-133(15x15)
FunctionStep-down type
Output Voltage600mV~5V
Ripple Noise-
Type-
Operating Temperature-40℃~+125℃
Quiescent Supply Current-
Voltage - Supply4.5V~28V
Capacitive Load(Max)200uF
Number of Outputs1
Iout6A
Output Voltage Accuracy-
Height2.82mm
Frequency - Switching800kHz
FeaturesProgrammable soft start;Programmable output voltage;Over Current Protection;Overvoltage Protection;Under Voltage Protection;Power-on timing control;External clock synchronization
Conversion Efficiency93%
Length15mm
Width15mm

Descrizione

Traduzione AI

The LTM4606 is a complete EN55022 Class B certified noise high voltage 6A switching mode DC/DC power supply. Included in the package are the switching controller, power FETs, inductor, and all support components. The on-board input filter and noise cancellation circuits achieve low noise operation, thus effectively reducing the electromagnetic interference (EMI). Operating over an input voltage range of 4.5V to 28V, the LTM4606 supports an output voltage range of 0.6V to 5V, set by a single resistor. This high efficiency design delivers 6A continuous current (8A peak). Only bulk input and output capacitors are needed to finish the design. High switching frequency and an adaptive on-time current mode architecture enables a very fast transient response to line and load changes without sacrificing stability. The device supports output voltage tracking and output voltage margining. Furthermore, the µModule regulator can be synchronized with an external clock for reducing undesirable frequency harmonics and allows PolyPhase operation for high load currents.

Caratteristiche

Traduzione AI
  • Complete Low EMI Switch Mode Power Supply
  • Wide Input Voltage Range: 4.5V to 28V
  • 6A DC Typical, 8A Peak Output Current
  • 0.6V to 5V Output Voltage Range
  • EN55022 Class B Certified
  • Output Voltage Tracking and Margining
  • PLL Frequency Synchronization
  • ±1.75% Total DC Error
  • Power Good Output
  • Current Foldback Protection (Disabled at Start-Up)
  • Parallel/Current Sharing
  • Current Mode Control
  • Up to 93% Efficiency at 5VIN,3.3V0UT
  • Programmable Soft-Start
  • Output Overvoltage Protection
  • -55°C to 125°C Operating Temperature Range (LTM4606MP)
  • SnPb or RoHS Compliant Finish
  • 15mm×15mm×2.82mm LGA Package
  • 15mm×15mm×3.42mm BGA Package

Applicazioni

Traduzione AI
  • ASICs or FPGA Transceivers
  • Telecom, Servers and Networking Equipment
  • Industrial Equipment
  • RF Equipment