LCSC Electronics logoLCSC Electronics svg logo
Iniciar sesión
USD
ADI LT3094IDD#PBF product image
  • LT3094IDD#PBF thumbnail 1
  • LT3094IDD#PBF thumbnail 2
  • LT3094IDD#PBF thumbnail 3
  • Diagrama de pines
  • Footprint
Imágenes ilustrativas

ADI LT3094IDD#PBF

Fabricante
N.º de pieza fab.
LT3094IDD#PBF
Nº LCSC
C580046
Emb.
DFN-12-EP(3x3)
Número de Cliente
Atrib. clave
-20V, 500mA, Ultra-low noise, ultra-high PSRR negative linear voltage regulator
Hoja de DatosADI LT3094IDD#PBF
Cumplimiento RoHS1 documentos disponibles
Piezas alternativas5
Garantía en cada pedido
100% Auténtico · Devolución o Reemplazo en 30 Días
En stock: 270
270 En stock, envío inmediato
Mínimo: 1Múltiplo: 1Unidad de venta: Piece
Añadir a la Lista BOM
Cant.Prec. unit.Importo total
1+$ 11.168$ 11.17
10+$ 9.5869$ 95.87
30+$ 8.6222$ 258.67
100+$ 7.8152$ 781.52
Encapsulado Estándar121/Full Tube
¿Mejor precio por mayor cantidad?
$

Especificaciones del Producto

Todo
TipoDescripción
CategoríaIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - Linear, Low Drop Out (LDO) Regulators
FabricanteADI
Emb.DFN-12-EP(3x3)
Output Voltage0V~19.5V
Number of Outputs1
Operating Temperature-40℃~+125℃@(Tj)
Supply Current (Iq)2.35mA
Output ConfigurationNegative
Output Current500mA
Operating Voltage20V
Output TypeAdjustable
FeaturesEnable control;Adjustable current limiting;Operating status indication;Input under-voltage protection;Thermal shutdown;Short Circuit Protection;Over Current Protection

Descripción

Traducción por IA

The LT3094 is a high performance low dropout negative linear regulator featuring ultralow noise and ultrahigh PSRR architecture for powering noise sensitive applications. The device can be easily paralleled to further reduce noise, increase output current and spread heat on a PCB. The LT3094 supplies 500mA at a typical 235mV dropout voltage. Operating quiescent current is nominally 2.35mA and drops to 3µA in shutdown. The device’s wide output voltage range (0V to –19.5V) error amplifier operates in unity-gain and provides virtually constant output noise, PSRR, bandwidth, and load regulation independent of the programmed output voltage. Additional features are a bipolar enable pin, programmable current limit, fast startup capability and programmable power good to indicate output voltage regulation. The regulator incorporates a tracking function to control an upstream supply to maintain a constant voltage across the LT3094 to minimize power dissipation and optimize PSRR. The LT3094 is stable with a minimum 10µF ceramic output capacitor. Built-in protection includes internal current limit with foldback and thermal limit with hysteresis. The LT3094 is available in thermally enhanced 12-Lead MSOP and 3mm × 3mm DFN Packages.

Características

Traducción por IA
  • Ultralow RMS Noise: 0.8µVRMS (10Hz to 100kHz)
  • Ultralow Spot Noise: 2.2nV/√Hz at 10kHz
  • Ultrahigh PSRR: 74dB at 1MHz
  • Output Current: 500mA
  • Wide Input Voltage Range: –1.8V to –20V
  • Single Capacitor Improves Noise and PSRR
  • 100µA SET Pin Current: ±1% Initial Accuracy
  • Single Resistor Programs Output Voltage
  • Programmable Current Limit
  • Low Dropout Voltage: 235mV
  • Output Voltage Range: 0V to –19.5V
  • Programmable Power Good and Fast Start-Up
  • Bipolar Precision Enable/UVLO Pin
  • VIOC Pin Controls Upstream Regulator to Minimize Power Dissipation and Optimize PSRR
  • Minimum Output Capacitor: 10µF Ceramic
  • 12-Lead MSOP and 3mm × 3mm DFN Packages

Aplicaciones

Traducción por IA
  • RF and Precision Power Supplies
  • Very Low Noise Instrumentation
  • High Speed/High Precision Data Converters
  • Medical Applications: Diagnostics and Imaging
  • Post-Regulator for Switching Supplies

Piezas alternativas

MPNFabricanteTipo alternativoEmpaqueDisponibilidadPrecio unitario
LT3094EDD#TRPBFADISimilaresDFN-12-EP(3x3)1,807$ 7.8335
LT3094IDD#TRPBFADISimilaresDFN-12-EP(3x3)278$ 8.4891
LT3094HDD#TRPBFADISimilaresDFN-12-EP(3x3)2$ 8.5169
LT3094MPDD#TRPBFADISimilaresDFN-12-EP(3x3)20$ 13.5792
LT3094EDD#PBFADISimilaresWDFN-12-EP(3x3)714$ 8.4841
Ver y comparar todas las piezas alternativas.