LCSC Electronics logoLCSC Electronics svg logo
Connexion
USD

Nexperia 74HCT85D,653

Fabricant
Réf. Fab.
74HCT85D,653
Réf. LCSC
C547831
Condit.
SO-16
Numéro Client
Caract. clés
4-bit magnitude comparator
Fiche TechniqueNexperia 74HCT85D,653
Conformité RoHS2 documents disponibles
Pièces alternatives5
Garantie sur chaque commande
100% Authentique · Retour ou échange sous 30 Jours

Spécifications du Produit

Tout
TypeDescription
CatégorieIntegrated Circuits (ICs)/Logic/Comparators
FabricantNexperia
Condit.SO-16
Input Logic Level - High2V
OutputActive High
Output FunctionA<B,A=B,A>B
Number of Channels4
Propagation Delay Time44ns@4.5V,50pF
Quiescent Current8uA
Current - Output Low(IOL)4mA
Current - Output High(IOH)4mA
Input Logic Level - Low0.8V
Voltage - Supply4.5V~5.5V
Output Logic Level - Low0.4V
Operating Temperature-40℃~+125℃
Output Logic Level - High3.7V~4.4V
FunctionMulti-device cascading

Description

Traduction par IA

The 74HC85; 74HCT85 is a 4-bit magnitude comparator that can be expanded to almost any length. They perform comparison of two 4-bit binary, BCD or other monotonic codes and present the three possible magnitude results at the outputs (Qₐ>₈, Qₐ₌₈ and Qₐ<₈). The 4-bit inputs are weighted (A0 to A3 and B0 to B3), where A3 and B3 are the most significant bits. For proper compare operation the expander inputs (Iₐ>₈, Iₐ₌₈ and Iₐ<₈) to the least significant position must be connected as follows: Iₐ<₈ = Iₐ>₈ = LOW and Iₐ₌₈ = HIGH. For words greater than 4-bits, units can be cascaded by connecting outputs Qₐ>₈, Qₐ₌₈ and Qₐ<₈ to the corresponding inputs of the significant comparator. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Caractéristiques

Traduction par IA
  • Wide supply voltage range from 2.0 to 6.0 V
  • CMOS low power dissipation
  • High noise immunity
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
  • Input levels:
    • For 74HC85: CMOS level
    • For 74HCT85: TTL level
  • Complies with JEDEC standards:
    • JESD8C (2.7 V to 3.6 V)
    • JESD7A (2.0 V to 6.0 V)
  • ESD protection:
    • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V
    • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

Applications

Traduction par IA
  • Process controllers
  • Servo-motor control