LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD

SGMICRO SGM791AYUDH4G/TR

Produttore
SGMICROAsian Brands
Cod. Prod.
SGM791AYUDH4G/TR
Cod. LCSC
C5153476
Imballo
UTDFN-4L(1x1)
Numero Cliente
Attr. chiave
2.5V~5.5V 1 UTDFN-4L(1x1) Supervisors
Scheda TecnicaSGMICRO SGM791AYUDH4G/TR
Garanzia su ogni ordine
100% Autentico · Reso o Sostituzione entro 30 Giorni

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Supervisors
ProduttoreSGMICRO
ImballoUTDFN-4L(1x1)
Reset Timeout-
Operating Temperature-40℃~+85℃
output typeOpen-drain
Reset Active Level-
Function-
standby current-
Voltage - Supply2.5V~5.5V
ChipTypeVoltage Detector
Threshold Voltage2.1V
Number of Voltages Monitored1

Descrizione

Traduzione AI

The SGM791A is a low current, single load sensing device that can detect connection or removal of the load on a supply bus. By using short pulse injections into the input capacitance and measuring the voltage change, load existence is periodically checked. The most recent detection status of the SNS pin can be reported on the FLG output. The device is available in a Green UTDFN-1×1.4L package. It operates in the ambient temperature range of -40°C to +85°C. In many applications, detection of the load existence is necessary for system operation. For example, a power bank must detect the connection or removal of the loads to power up or power down the power circuits. The SGM791A provides a simple load detection solution for these applications by checking the load capacitance as indicator. The SNS pin acts as a pulse source with relatively large internal resistance. Short pulses of tTEST (35ns, TYP) time are periodically injected by the SNS pin to the power bus every tDET (160ms, TYP) period [5 - 7 times per second). The SNS pin couples to the bus by a capacitor. With ferrite beads used on the bus, the permanent capacitances of the power bus are isolated and the load capacitance can be detected directly by injecting signals. High-impedance ferrite beads block the pulses from injecting into the bus capacitors. The SNS pin sends the pulses periodically and checks the resulting voltage change. When a load capacitance is attached to the SNS pin, the pulse voltage will drop, and if the load is removed, the pulse voltage will rise. Right after each detection (tDET) period of the SGM791A, the status of the load connected to the SNS is updated on the FLG output. The FLG state remains unchanged until the next test.

Caratteristiche

Traduzione AI
  • 2.5V to 5.5V Operating Voltage Range
  • Very Low Operating Current: 300nA (TYP)
  • Internal PFET Open-Drain Output
  • 160ms Detection Period
  • Available in a Green UTDFN-1×1-4L Package

Applicazioni

Traduzione AI
  • TWS headphone
  • Power Bank
  • Powered Storage Box
  • Wall Socket
  • Low Standby Power Cord Supply