LCSC Electronics logoLCSC Electronics svg logo
Entrar
USD

TDSEMIC HT1621B-SSOP48-TD

Fabricante
TDSEMICAsian Brands
Cód. da peça
HT1621B-SSOP48-TD
Nº LCSC
C42421887
Emb.
SSOP-48
Número do Cliente
Atrib. princ.
2.4V~5.2V 32 Segment 3-Wire Serial Interface 60uA SSOP-48 Display Drivers RoHS
Folha de DadosTDSEMIC HT1621B-SSOP48-TD
Conformidade RoHS1 documentos disponíveis
Peças alternativas1
Garantia em cada pedido
100% Autêntico · Devolução ou Substituição em 30 Dias

Especificações do Produto

Tudo
TipoDescrição
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Display Drivers
FabricanteTDSEMIC
Emb.SSOP-48
Voltage - Supply2.4V~5.2V
Frequency256kHz
Operating Temperature-25℃~+75℃
Pd - Power Dissipation-
Display Configurations(bit)32x4 bit
Display Configurations(Segment)32 Segment
Interface3-Wire Serial Interface
FeaturesBuilt-in oscillator
Quiescent Current (Iq)0.1uA
Current - Supply60uA

Descrição

Tradução por IA

The 1621B is a peripheral device for expanding MCU I/O ports. With a 32×4 display matrix, it is a 128-dot memory-mapped multi-function LCD driver circuit. The software features of the 1621B make it well-suited for LCD display applications, including LCD modules and display subsystems. The interface between the host controller and the 1621B requires only 3 or 4 ports. The Powerdown command reduces power consumption.

Recursos

Tradução por IA
  • Operating voltage: 2.4V~5.2V
  • Built-in 256kHz RC oscillator
  • External 32.768kHz crystal or 256kHz clock input
  • 1/2 or 1/3 bias; 1/2, 1/3, or 1/4 duty cycle
  • Internal Timebase frequency source
  • Two selectable buzzer frequencies (2kHz/4kHz)
  • Powerdown command for reduced power consumption
  • Internal Time base and WDT watchdog circuit
  • Timebase/WDT overflow output with 8 Timebase/WDT clock sources; 32×4 LCD driver
  • 32×4-bit display RAM
  • 3-wire serial interface
  • Internal LCD drive frequency
  • Software configurable
  • Data mode and command mode instructions
  • Auto-increment R/W address
  • Three data access modes
  • VLCD pin for LCD voltage adjustment; VLCD voltage must be less than or equal to VDD voltage